THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Thank you both for your help, seems i have 2 bad batteries 1 real bad lol. thanks again.

Buzz

will check voltage and main line thank you. Starter was rebuilt about a year ago. Thank you for your reply.

Hi all. Drove the pinz yesterday, started and ran fine. Tried today and all i get is one click from starter when i push the button. I cleaned ground cable and all battery post, still just a click. Any advice ? Thanks in advance.

Happy that it worked for you. I wish I had asked before I did all those things to my 710m. I Now check the molex every few months just to be safe.

Hi Recon,
I had the same problem a while back with my 74m. After carb rebuild, fuel pump rebuild, new gas tank, Jim L advised checking the molex connection and bingo. I just cleaned it and it ran like new. would be worth a try.

Thanks for chiming in Jim. I didnt check out put but I am going to shop with it tomorrow. I will get them to check it. He has worked on it a few times but pinzgauers are not his cup of tea :( I will take the repair manual for sure. If you have any other tips to check I will be sure to tell him. Than...

Thanks for the reply Robin. I will try the night run. The last time it had these symptoms it was a dirty molex connection. I cleaned it today and it seemed to get worse.

Hi all. About a week ago my pinz started missing. When started cold it will run and idle perfect, after driving 20-30 min. you can kill the engine and start again and it has a bad miss at mid range. I have replaced plugs, air and fuel filters, and coil. Any suggestions would be great. Thanks in adva...

Merry Christmas and happy new year to all!

Buzzz

Thanks for the replies Jim and Edzz. I overlooked the specs in the repair manual. :oops: Jim sounds like a great price. I will need to follow up with the local source first, a close friend spent lots of time locating them. I should know in a few days if they can reline the brakes, If not I do want t...

The info I am looking for is the thickness of the lining. I may have found a source for lining my brakes close to home. Thanks again.

Buzzz

Can anyone post the brake lining specs for a 710m. I did a search and came up empty. Thanks in advance.

Buzzz

psylens I am no expert for sure but over the past three years my 710m has acted the same way you have described both times it was moisture in the dissy cap. Might be worth a look.

Buzzz

Jer Bear I had an aluminum tank made a few years ago and have had no issues on my 710m. Had it made like the stock tank with baffles, painted to match the truck. If I were doing it again I would remove the jerry can mount and extend the tank.

Cheers Buzz

David I have had that federal tire on my 710m for over a year which I drive every day and they have more than half the tread left. I think you will be very happy with them.

Buzz