Search found 22 matches

by Paul Gudmundson
Fri Feb 24, 2017 9:59 am
Forum: Owner builds, customizations & accessories
Topic: camperized pinny
Replies: 11
Views: 5496

Re: camperized pinny

does anyone know of a good on board 24v air compressor ?
by Paul Gudmundson
Fri Feb 17, 2017 12:35 pm
Forum: Owner builds, customizations & accessories
Topic: camperized pinny
Replies: 11
Views: 5496

Re: camperized pinny

walls are 1 1/2" aluminum tube with the pink insulation board in the spaces and ya had the same thought about sewing hooks for bungee cords to suck the fabric in when closing. a buddy had a pop up camper on his toyota and had trouble with the canvas not cooperating when closing so he added a ex...
by Paul Gudmundson
Fri Feb 17, 2017 11:30 am
Forum: Owner builds, customizations & accessories
Topic: camperized pinny
Replies: 11
Views: 5496

camperized pinny

well i thought abut doing this for about 6 years now and last winter when work was slow it started. Had to put it a side when work picked up but yesterday i got it on where i can now drive the truck with it on. The back canvas top has seen better days so its been off for the duration of this build s...
by Paul Gudmundson
Mon Jul 18, 2011 9:24 pm
Forum: Engine
Topic: 2.7 L
Replies: 6
Views: 4123

2.7 L

well i am now past the brake in period of jim's 2.7 L kit with cam and i can't be more pleased with the results :D i find i don't down shift into 4th much at all and my foot is not always to the floor. sure its not huge hp gain but in my opinon its how the pinz engine should have come from the facto...
by Paul Gudmundson
Mon Jul 18, 2011 8:46 pm
Forum: Brakes, Suspension, Steering & Tires
Topic: Tire Question
Replies: 20
Views: 9258

Re: Tire Question

i've been on bfg's 265 75 16 a/t for 10 years now with 45,000km and its time to get rid of them lol. they have been a good all around tire but i can't do some of the trails i used to could be 40% tread or old rubber. been looking for something more extreme off road maybe super swampers. as for the g...
by Paul Gudmundson
Thu Jun 16, 2011 9:41 am
Forum: General chat
Topic: air compressor solution
Replies: 44
Views: 17868

Re: air compressor solution

you might want to check out Viair air compressors they make 24v ones cost about 350$. i have looked into them but i don't have one yet. just made a front winch bumper that is also a air tank for mine so when i do get one i'll be ready. there are a few differant models from ones that use tanks to por...
by Paul Gudmundson
Fri May 06, 2011 8:44 pm
Forum: Drivetrain
Topic: Axel boot Question
Replies: 9
Views: 4685

Re: Axel boot Question

i bought some before off ebay and they suck donkey balls i put them on when i did the upgrades to the rear diff and fixed my oil leaks. my pinny sat for a good year and then i noticed they were all cracked so i had to pull the axle housings and put the not so nice looking stock ones back on. then ju...
by Paul Gudmundson
Tue Apr 12, 2011 11:06 pm
Forum: Electrical
Topic: Distributorless ignition
Replies: 5
Views: 2451

Re: Distributorless ignition

never heard of it before but would like to know how it turns out.
by Paul Gudmundson
Fri Mar 25, 2011 8:32 pm
Forum: Owner builds, customizations & accessories
Topic: did some remodeling of my 712M
Replies: 19
Views: 9798

Re: did some remodeling of my 712M

nice job i like it . i have been planning on making a hard top for mine for awhile the soft top is in bad shape.
by Paul Gudmundson
Thu Mar 24, 2011 7:19 pm
Forum: General chat
Topic: Pinzgauer overheating on The Unit
Replies: 4
Views: 1818

Re: Pinzgauer overheating on The Unit

if you have ever played the video game smugglers run 2, came out about 9 years ago my 710m was used for the main characters vehicle transport in all the video clips.i think there is also a hopped up one in the game if you get far enough to unlock it only tried it once don't have a playstation also t...
by Paul Gudmundson
Tue Mar 22, 2011 7:45 pm
Forum: Engine
Topic: Engine conversion
Replies: 54
Views: 44116

Re: Engine conversion

well i was hopping to report sooner on jims 2.7 conversion but still waiting on some other parts to get here :cry: the pistons and cam from jim look great and were packaged nice. they slipped in with no problem at all and if you have any questions jim is always willing to help you out. hopefully by ...
by Paul Gudmundson
Sun Mar 20, 2011 3:09 pm
Forum: Engine
Topic: Engine leaks - worth fixing or NEW MOTOR
Replies: 25
Views: 10301

Re: Engine leaks - worth fixing or NEW MOTOR

my speedo has been leaking slowly for 10 years put new gaskets and still wet just not enough to worry about. shipping to canada can be a pain across the border depending how its shipped usps is the best but takes a bit longer to get. if use ups or fedx you get hit with about a 100 bucks brokerage fe...
by Paul Gudmundson
Wed Dec 29, 2010 1:03 pm
Forum: Engine
Topic: Supporting engine during gearbox removal
Replies: 5
Views: 2532

thats what i used was the ratchet strap work well and still holding.
by Paul Gudmundson
Sat Dec 25, 2010 12:08 pm
Forum: Engine
Topic: major engine failer
Replies: 17
Views: 8407

well parts are sent to jim so looking forward to the piston and cam upgrades.now time to look into temp gauges so this won't happen again.
by Paul Gudmundson
Sun Dec 12, 2010 10:00 pm
Forum: Engine
Topic: Oil filler pipe cracked
Replies: 6
Views: 2843

i would gladly trade you my problem for your hehe :D