THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

This 710K has spent its live in dry So Cal until a few years ago, so no rust, it is also kept inside. It runs good and is in great shape. I added the cage to it so we could sit on top at the Motocross & Drag rases and see over the other trucks. It also keeps the sun from making it an oven. It ca...

I also removed the wires from the starter and re-connected them, just to be 100% sure that was not the issue.

No the wires are tight. After installing the starter, it turned the engine over. The ground strap was removed, cleaned with wire wheel as Part of installing the rebuilt starter. I had power, it turned the engine over.

My starter was frozen up, so I installed another starter, hit the button and engine turned over. So I put everything back together, clutch cylinder, dip stick and such, went to start it and no power? If I turn on the master switch behind the seat I can hear the normal click at the box above the tabl...

Looking to sell my Pinzgauer. Spent all its USA life in Ca. until 3 years ago and kept in garage here. Looking to get 35K I have many extra parts including original items not currently on the vehicle. Also a Disk and USB drive with tons of info including manuals, wire diagrams, you name it its on th...

You might also check the sending unit. On mine the wires jumped track, sorta speak. It's a easy fix to put the wires back into place. Added tension so wires are no longer sag. No volt meter says unit is good. Because of that I think the gage is now bad, as it heated up and wire came off, I'm thinkin...

It was a great time spending with others. The mud was fun.

Mine put out black smoke I adjusted the screw, from your picture on the far left, turn it out if possible. I reduces the spring tension on the diaphragm. Mine went from black to clean, but my screw was all the way in?? That way when I bought the Rig.

According to the post I have found, the wheel bolt pattern is 5X160mm But when I measure my bolt pattern from center of stud 1 to stud 3 it seam to measure 155mm, not 160. What am I doing wrong?

David I would like a full set of tinted glass for my "74" 710K, and I would like to bring it to you and have you install the glass.
When you have time. I already bought and have the new rubber.
Call me Dale 951-926-8082

I built mine as well, got tired of the leak.
I used exhaust flex hose, solid metal coil, runs allot quieter now.

What technique or method do you use to adjust the brakes, both front and rear??

Anyone else thinking about taking the Rubicon Trail trip ??
I think it would be great to get some people together and make the trip. Lets show them Jeeps what we can do.

Anyone else??

Or does it need to be removed and just cleaned and rebuilt?

Does anyone know?

It smokes through the exhaust pipe, but the smoke can then enter.
It should not smoke that much.