THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Can you share some pictures of it?

Do you need the replacement to be exact to the original, with the goal of keeping the truck pristine, or can you accept a workable replacement?

What about the windshield, how would you handle that area?

How you can easily check for vacuum leaks ? A common way to look for vacuum leaks is to spray brake cleaner on the carbs and around their bases. You'll hear a change in RPM if the engine draws in those fumes. The brake cleaner dries without residue, BTW. Check the vacuum hose that goes to the brake...

Dayco 63520 Garage Exhaust Hose with 2” I.D. x 11’ Length is a perfect fit over the 710 standard tailpipe

Which states have people had success registering a 710 Pinz in, and which state have people had problems?

For example, in CA 1975 and older is fine, newer is not allowed.

Others?

Specifically, I'm curious about states in the Pacific Northwest, upper Midwest, and the northeast states like NH.

Out of stock at SAV and EI
09-01-63 (https://swissarmyvehicles.com/pinzgauer ... q=09-01-63)

Anyone know a source to get one? My isn't in great shape and I'd like to clean it up.

Check the gap between the Pertronix pick-up sensor and the black-plastic-encased magnet on the distributor shaft -- it should be quite close, but not touching. Check your timing. You'll need a standard timing light for this. Since you have civilian wires, it's super easy to use an inductive pick-up ...

Watch for rub points on the hose -- I added a p-clamp in one spot, and a metal sheath where it penetrates the body sheet metal.

I would start your debugging by disconnecting the vacuum hose that goes from the engine to the power brake booster. Close it off at the engine.

You may have booster diaphragm leak.

Were you running straight gasoline or ethanol blend? I ask because I have two vehicles (one carb and one FI) that do notably worse with heat soak on ethanol blends vs. non-blends. Is it possible the engine was actually flooded,and not lean? I could imagine flooded from the fuel in the bowls expandin...

I found these to be a nice drop-in replacement for the speedometer and fuel gauge backlight bulbs: https://www.amazon.com/gp/product/B0BX9BTTV1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 Qoope BA9S LED Bulb 1895 1820 1893 313 LED Bulbs White Super Bright 10-30V AC/DC Non-Polarity for Car Int...

An option I'm considering is:
https://blackrhinotrailer.com/car-haulers/ -- 1,575lb for the 18ft model

What trailers have others used?

I'm exploring trailer options to allow a 710K to be trailered behind a truck with a towing capacity of 6400lb, so I'm looking for a lightweight trailer. Any recommendations? PS: I started a separate thread on the CG of a 710K to help evaluate if a speculative trailer would allow for proper tongue we...

Does anyone know (by documentation or measurement) the front-to-back CG (Center of Gravity) for a 710K? I couldn't find it in the documentation. If someone had front and rear axle scale weights, it's easy to calculate from that. The goal is to evaluate trailer options wrt vehicle position and tongue...

I conduct oil analysis with Blackstone for most of my vehicles. It's $35 of value/entertainment. Here's what they came back with most recently: As you might imagine, we haven't seen many samples from these air-cooled 2.5L Steyer-Puch engines over the years, and this is the first one where the interv...