Search found 16 matches

by locosmith
Fri Dec 10, 2010 8:26 pm
Forum: Drivetrain
Topic: clutch pedal
Replies: 7
Views: 4009

Where In Tulsa?

I'm in wagoner, I have a 710 messed with it a bit been a mechanic 35 years, maybe I can help if you need some. Let me know. loco
by locosmith
Thu Nov 25, 2010 8:59 pm
Forum: Drivetrain
Topic: Clutch Help Needed! PLEASE
Replies: 8
Views: 5060

Yea it was stuck to the pressure plate, had to pry it off. USed scotch brite and emory paper to clean it and make it a little ruff still had the original machine marks on the plate but looked like rust or the metal from the clutch plate left some residue that i cleaned off. looked good still plenty ...
by locosmith
Wed Nov 24, 2010 4:36 am
Forum: Drivetrain
Topic: Clutch Help Needed! PLEASE
Replies: 8
Views: 5060

Got her done, disk was stuck all looked good cleaned up put back together better then ever> Thanks
by locosmith
Thu Nov 18, 2010 3:37 pm
Forum: Drivetrain
Topic: Clutch Help Needed! PLEASE
Replies: 8
Views: 5060

Thanks I've read all I can find I thought that was my problem, Thanks Again
by locosmith
Wed Nov 17, 2010 1:55 pm
Forum: Drivetrain
Topic: Clutch Help Needed! PLEASE
Replies: 8
Views: 5060

Clutch Help Needed! PLEASE

Clutch Problem? I parked my 710 in may was fine then, I went to start it last month, no go. Found I had to replase the fuel pump. went to get it out today and can't get it into gear with unit running. Shut it off it goes into gear fine. Question, how do I determine if its the slave or the cyl at the...
by locosmith
Sun Dec 06, 2009 6:27 pm
Forum: Body & Interior
Topic: Pinzgauer heater duct replacement
Replies: 5
Views: 5200

Thanks, I need to get that completed, so i can do the exhaust. Thanks Again. Loco
by locosmith
Sat Dec 05, 2009 6:30 pm
Forum: Body & Interior
Topic: Wooden side rails 712M (Rub Rails)
Replies: 20
Views: 10180

Side Rails

I made a set out of Cedar, Thay are working well, and don't rot. Loco
by locosmith
Sat Nov 28, 2009 7:38 pm
Forum: Owner builds, customizations & accessories
Topic: After market seats - what did you use?
Replies: 27
Views: 15076

Freight liner seats.

I'll see if I can get pictures on mine from the freight liner. Nice seats, , made for ruff ride, truck, very comfortable. Yea I couldn't see 800.00 for seats, they only see my butt, didn't make much since, I use my truck for hunting not just the road. Loco
by locosmith
Tue Nov 24, 2009 7:24 am
Forum: Owner builds, customizations & accessories
Topic: After market seats - what did you use?
Replies: 27
Views: 15076

Height

My son are 6 ' tall and have no problems with touching the top, due to the seat being formed and you set in it, so they are lower in the center, very comfortable. Loco
by locosmith
Tue Nov 24, 2009 7:18 am
Forum: Owner builds, customizations & accessories
Topic: After market seats - what did you use?
Replies: 27
Views: 15076

Seats that are great.

I was at the monthly auction and a guy had a dirty set from a White Freight liner, 18 wheeler. High backed, lumbar with air ride driver(couldn't use air ride) I'm only 5' 9" so, any way cleaned them and used the stock frames, added tabs, still can install stock cushions if need. They work great...
by locosmith
Tue Nov 24, 2009 7:11 am
Forum: Body & Interior
Topic: Pinzgauer heater duct replacement
Replies: 5
Views: 5200

710

Hi How many sizes are there? I need to place an order but haven't measured all. The one under the truck is 1 3/4 I think. Thanks Loco
by locosmith
Thu Nov 05, 2009 6:09 am
Forum: Engine
Topic: Tail pipe for EI muffler?
Replies: 9
Views: 5423

OK!

I feel better, Cool, I like it, would like to see results. Thanks for the Help.
by locosmith
Wed Nov 04, 2009 6:11 pm
Forum: Engine
Topic: Tail pipe for EI muffler?
Replies: 9
Views: 5423

Correct!

Well i thought with your comment you had some way of explaining it. I read the MYth on Torque and Back pressure. To get torque you need RPMS, Which will make HP also, lower RPM and lower everytning. Now, How does the BP create or help Torque? It's not on the net. On a Pinz. If you don't adjust the f...
by locosmith
Mon Nov 02, 2009 2:41 pm
Forum: Engine
Topic: Tail pipe for EI muffler?
Replies: 9
Views: 5423

Resistance

I need help here on the High Restance muffler? How can that help torque? The engine makes torque, the restance in the muffler would cause it to have higher temp, yes, by staying in longer. If the engine exhaust leaves easier, it should help it breath better! Explain this restance and how much? If th...
by locosmith
Wed Sep 23, 2009 7:12 am
Forum: General chat
Topic: Any idea how this guy mounted his door panels?
Replies: 5
Views: 2450

Gun Rack?

Can you show how you mounted on gun rack. I'm still trying to figure out how to mount mine so I can carry them when I'm out. Thanks loco