Search found 16 matches
- Fri Dec 10, 2010 8:26 pm
- Forum: Drivetrain
- Topic: clutch pedal
- Replies: 7
- Views: 4017
Where In Tulsa?
I'm in wagoner, I have a 710 messed with it a bit been a mechanic 35 years, maybe I can help if you need some. Let me know. loco
- Thu Nov 25, 2010 8:59 pm
- Forum: Drivetrain
- Topic: Clutch Help Needed! PLEASE
- Replies: 8
- Views: 5088
Yea it was stuck to the pressure plate, had to pry it off. USed scotch brite and emory paper to clean it and make it a little ruff still had the original machine marks on the plate but looked like rust or the metal from the clutch plate left some residue that i cleaned off. looked good still plenty ...
- Wed Nov 24, 2010 4:36 am
- Forum: Drivetrain
- Topic: Clutch Help Needed! PLEASE
- Replies: 8
- Views: 5088
- Thu Nov 18, 2010 3:37 pm
- Forum: Drivetrain
- Topic: Clutch Help Needed! PLEASE
- Replies: 8
- Views: 5088
- Wed Nov 17, 2010 1:55 pm
- Forum: Drivetrain
- Topic: Clutch Help Needed! PLEASE
- Replies: 8
- Views: 5088
Clutch Help Needed! PLEASE
Clutch Problem? I parked my 710 in may was fine then, I went to start it last month, no go. Found I had to replase the fuel pump. went to get it out today and can't get it into gear with unit running. Shut it off it goes into gear fine. Question, how do I determine if its the slave or the cyl at the...
- Sun Dec 06, 2009 6:27 pm
- Forum: Body & Interior
- Topic: Pinzgauer heater duct replacement
- Replies: 5
- Views: 5222
- Sat Dec 05, 2009 6:30 pm
- Forum: Body & Interior
- Topic: Wooden side rails 712M (Rub Rails)
- Replies: 20
- Views: 10218
Side Rails
I made a set out of Cedar, Thay are working well, and don't rot. Loco
- Sat Nov 28, 2009 7:38 pm
- Forum: Owner builds, customizations & accessories
- Topic: After market seats - what did you use?
- Replies: 27
- Views: 15173
Freight liner seats.
I'll see if I can get pictures on mine from the freight liner. Nice seats, , made for ruff ride, truck, very comfortable. Yea I couldn't see 800.00 for seats, they only see my butt, didn't make much since, I use my truck for hunting not just the road. Loco
- Tue Nov 24, 2009 7:24 am
- Forum: Owner builds, customizations & accessories
- Topic: After market seats - what did you use?
- Replies: 27
- Views: 15173
Height
My son are 6 ' tall and have no problems with touching the top, due to the seat being formed and you set in it, so they are lower in the center, very comfortable. Loco
- Tue Nov 24, 2009 7:18 am
- Forum: Owner builds, customizations & accessories
- Topic: After market seats - what did you use?
- Replies: 27
- Views: 15173
Seats that are great.
I was at the monthly auction and a guy had a dirty set from a White Freight liner, 18 wheeler. High backed, lumbar with air ride driver(couldn't use air ride) I'm only 5' 9" so, any way cleaned them and used the stock frames, added tabs, still can install stock cushions if need. They work great...
- Tue Nov 24, 2009 7:11 am
- Forum: Body & Interior
- Topic: Pinzgauer heater duct replacement
- Replies: 5
- Views: 5222
710
Hi How many sizes are there? I need to place an order but haven't measured all. The one under the truck is 1 3/4 I think. Thanks Loco
- Thu Nov 05, 2009 6:09 am
- Forum: Engine
- Topic: Tail pipe for EI muffler?
- Replies: 9
- Views: 5481
OK!
I feel better, Cool, I like it, would like to see results. Thanks for the Help.
- Wed Nov 04, 2009 6:11 pm
- Forum: Engine
- Topic: Tail pipe for EI muffler?
- Replies: 9
- Views: 5481
Correct!
Well i thought with your comment you had some way of explaining it. I read the MYth on Torque and Back pressure. To get torque you need RPMS, Which will make HP also, lower RPM and lower everytning. Now, How does the BP create or help Torque? It's not on the net. On a Pinz. If you don't adjust the f...
- Mon Nov 02, 2009 2:41 pm
- Forum: Engine
- Topic: Tail pipe for EI muffler?
- Replies: 9
- Views: 5481
Resistance
I need help here on the High Restance muffler? How can that help torque? The engine makes torque, the restance in the muffler would cause it to have higher temp, yes, by staying in longer. If the engine exhaust leaves easier, it should help it breath better! Explain this restance and how much? If th...
- Wed Sep 23, 2009 7:12 am
- Forum: General chat
- Topic: Any idea how this guy mounted his door panels?
- Replies: 5
- Views: 2457
Gun Rack?
Can you show how you mounted on gun rack. I'm still trying to figure out how to mount mine so I can carry them when I'm out. Thanks loco