Search found 2457 matches
- Tue Aug 17, 2021 7:48 am
- Forum: Body & Interior
- Topic: Rubbing strip removal
- Replies: 15
- Views: 13612
Re: Rubbing strip removal
I thought about square tube but there was a possibility of debris accumulating there so the 'C' channel was the obvious choice. I did the replacement at a time when I had no welder to cap the ends of tube. Also thought about replacing the rail with the wood but it was a constant replacement situatio...
- Tue Oct 20, 2020 3:36 pm
- Forum: Body & Interior
- Topic: Rubbing strip removal
- Replies: 15
- Views: 13612
Re: Rubbing strip removal
I replaced my wood rail with a 2 inch 'C' channel and used 1/8 washers to stand it off from the body. Only one screw refused to be removed so I drilled it out an in the body it stayed, who is going to notice one more rattle on this thing? I had sheet alu bent to form a shelf and used that for a tabl...
- Tue Mar 31, 2020 7:51 pm
- Forum: Body & Interior
- Topic: Removing the passenger side windows - problem
- Replies: 4
- Views: 4804
Re: Removing the passenger side windows - problem
I have a set od the original window rails that I am willing to let go very cheap as I have sold my pinz and have no reason to hold on to them. Let me know if anyone is interested in them.
- Wed Feb 19, 2020 11:25 pm
- Forum: Brakes, Suspension, Steering & Tires
- Topic: Parking Brake Malfunction...Slipping Handle
- Replies: 12
- Views: 10973
Re: Parking Brake Malfunction...Slipping Handle
I did not take the handbrake apart in the cabin, I fixed the brake assembly in the wishes hat and that fixed the part in the cabin. there is a fill port in the brake cable in the cabin that accepts oil for the cable for lubrication. Maybe a little oil down the shaft once in a while.
- Wed Feb 19, 2020 12:44 pm
- Forum: Engine
- Topic: Engine Oil... Again
- Replies: 20
- Views: 16880
Re: Engine Oil... Again
I only ever used Pennzoil SAE 30 in my Pinz, winter and summer. Never had an issue. Mine was 1967 710M
- Tue Feb 18, 2020 9:47 pm
- Forum: Brakes, Suspension, Steering & Tires
- Topic: Parking Brake Malfunction...Slipping Handle
- Replies: 12
- Views: 10973
Re: Parking Brake Malfunction...Slipping Handle
The park brake is very interesting. Mine was not holding so I took ir completely apart, cleaned everything I could with brake cleaner (also used it on my brakes) returned it to original looks. Worked fine, don't forget the twists. I had also bought the replacement discs and gave them to the buyer wh...
- Fri Jan 31, 2020 7:17 am
- Forum: Body & Interior
- Topic: Rubbing strip removal
- Replies: 15
- Views: 13612
Re: Rubbing strip removal
Yes several that had to be drilled stayed in the hollow of the tube, no way to get them out.
the pinz makes so much noise anyway that one more rattle isn't going to be noticed although I did not notice the pieces of the drilled out bolt making noise.
the pinz makes so much noise anyway that one more rattle isn't going to be noticed although I did not notice the pieces of the drilled out bolt making noise.
- Fri Jan 25, 2019 3:09 pm
- Forum: CLASSIFIEDS: Pinzgauers, Haflingers and Volvos For Sale. Parts and Goods too!
- Topic: FS locking rail
- Replies: 0
- Views: 3195
FS locking rail
For sale, locking rail for front door windows, LH & RH, used, excellent shape, no rust, straight. Removed from my 710M when installing deeper channels. These have no drain hole. I no longer own the pinz and just found these in my shop wrapped in bubble wrap. Both sides for $125, you pay shipping...
- Sun Sep 30, 2018 1:39 pm
- Forum: Electrical
- Topic: Where is the ballast resistor?
- Replies: 23
- Views: 36763
Re: Where is the ballast resistor?
When I had the pinz I had a few extra parts. Fan belt, voltage regulator, ballast resistor, fuel pump, wiper blades, oil & filter, tire plugs, various bulbs, pertonix coil, rotor & cap and a few other thing that I can't remember right now. I did keep up maintenance to avoid needing them but ...
- Wed Oct 25, 2017 2:09 pm
- Forum: Body & Interior
- Topic: Small plugs around front doors
- Replies: 17
- Views: 7604
Re: Small plugs around front doors
Try silicon sealant and paint over them, unless you think there is a use for them.
- Sun Sep 10, 2017 4:40 pm
- Forum: General chat
- Topic: Soft top cleaning
- Replies: 7
- Views: 4038
Re: Soft top cleaning
I had the original type top and every year I would take it off, spread it in the driveway (after washing the concrete) and brush it with dish soap, hose it off and then spray it with 303. Kept it looking good for ten years.
- Sat Jun 10, 2017 4:04 pm
- Forum: Owner builds, customizations & accessories
- Topic: engine swaps...????
- Replies: 19
- Views: 11729
Re: engine swaps...????
I was toying with the idea of improving the pinz engine with just an upgrade to the pistons and cam but to only gain a bit more power it seemed to be wrong to change it and money not well spent. Deciding to have a vehicle that went faster and had a bit more luxury, I sold the pinz to a new proud own...
- Mon Mar 06, 2017 12:14 am
- Forum: Owner builds, customizations & accessories
- Topic: Hello from Norway
- Replies: 11
- Views: 7144
Re: Hello from Norway
We will be taking a tour of Norway in June and I know one of the stops is Oslo. I am looking forward to seeing your beautiful country.
- Sat Mar 04, 2017 2:22 pm
- Forum: Brakes, Suspension, Steering & Tires
- Topic: Brake Lights stay on
- Replies: 15
- Views: 8643
Re: Brake Lights stay on
When you switch to LED bulbs keep in mind they have a lower current draw and things may not work as you plan. May have to change the flasher unit. I avoided that issue by just adding the LED lights to the existing circuit and left the existing tail lights in place. I drilled out the place for the re...
- Tue Oct 25, 2016 2:24 pm
- Forum: CLASSIFIEDS: Pinzgauers, Haflingers and Volvos For Sale. Parts and Goods too!
- Topic: Marmite food transport container
- Replies: 0
- Views: 2366