THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Coenraad I looked up a locl distributor of http://www.gebert-kg.de/ removing the lever was a task. I loosenened the 5 platform bolts on the rear end of my 712 and raised the platform until the retaing straps were fully stretched.. then I hammered a screwdriver into the slot of the lever, like a wedg...

My Pinz also suffered from a corrosion in the joint on the lever.
I took an angle grinder and cut off the pin with the ball on it, drilled a 5 mm hole and cut an M6 thread there.

Then I installed a stainless joint with a seal



no problems since

check the pics on flickr, it has no difflock knobs ....

unipus you can easily verify the function of the fuel pump. on the driver side of the carbs you have the fuel hose coming from the pump. It is attached with a bolt with a 17 mm hex head. Loosen that bolt one at a time, remove the central lead from coli to distributor and try to start. this allows ai...

my 5 cents of wisdom here:

go for stainless bolts and nuts. you will be grateful the next time you have to disassemble the thing ...

Bein in Poland you can order tax free within the EU from S-Tec.
Go to http://www.puch.at and shop at the manufacturere.

I got mine last year within 2 days.

My girlfriend laughed when I said that pinz was ugly because she thinks all pinzgauer are ugly... mine was seriously ugly when i bought it, and the missus shrugged ... http://up.picr.de/26351019px.jpg two years later my wife prefers the Pinz for vacation... http://up.picr.de/26350992ot.jpg you get ...

check your valve clearance and ignition timing.
sounds like you are backfiring through the carbs.

you can check it by opening the small lid in the "turtle" and placing a hand on top of the air intake there.

on the front they have the license plate on the driver side



and the rear side never had any plates next to the door handle

well, towing a 712 with a 710 would be a daring approach, if you ever need to stop that train ....

I do not remember a sign indicating brigde weight info on any of the Austrian Army Pinzgauers.
They have white spraypointed tactical signs indicating service groups, location ...

I do speak German, but I don't understand the term " bridging plates"...

Please explain, and I'll try to help

so to be precise you want to replace bearings 6 and 33 of http://www.puch.at/en/spare-parts/pinzgauer-petrol-710-712/front-axle/housing-front-axle/ you will have to remove the brake bracket which holds the needle bearing. you get the ball point bearing out of the axle fist you'd better pull off the ...

My steering could not be adjusted anymore, so i decided to go for a full refurbishment. once I took it apart i knew why http://up.picr.de/24799038ss.jpg I also replaced the bronze bushings and the ball point bearings. The bottom one is easy, but the upper one requires a special tool. I had this done...

Scott

I got that button today. Fits nicely, thanks for the hint.
To save me from reinventing the weel: how did you connect ground ? => allsorted, the spring needed some movement to give contact..