THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Does anyone own the Brake Bleeding Tool #9053258012 and is it worth the $69 for it? Are there any alternatives?

TIA

Paul

The brake fluid level sensor is part of the fluid reservoir cap(s). I have seen one model of the reservoir that didn't have the sensor though.

Paul

I've installed the SAV kit and it wasn't too difficult but was easier when I asked for help from my younger and more flexible neighbor. The kit does connect from the ends of the manifolds to the flange on the front of the heat exchanger. The manifolds have rings welded on them for mating up to the s...

That light also indicates if the brake fluid is low so that's a possibility.

Paul

I think this might be what you're referring to:

http://www.pinzgauer.com/showdetails.ph ... 111850690U

Group 09-40-55. SAV has at 115.28 new. I bought a used one for 25.00 from them a while back since I had no idea how to make one.

Paul

Very nice! Free span openings are great - no posts to hit

Mine used to look something like that but now it's full of stuff (or my toys as my wife calls them).

Enjoy,
Paul

chacaocop1
PostPosted: Wed Mar 11, 2009 12:40 pm Post subject: Wax
Where can I buy the wax put on the pinzgauer's blind spots? What is it called?

I think you are referring to Waxoyl. It is available from: http://www.englishparts.com/products/WA ... 5-375.html

Paul

It continues to look awesome! VERY nice job - wish my engine looked like that. Maybe some day.

What product are you using for undercoating?

Paul

Excellent! Thanks for the info.

Paul

pinzwheeling said:

I have a set of Bestop seats and they are some of the best I've tried. Very low (almost non-existent) bolstering on the seat bottom and about 1/2 inch higher than stock seats.

Do you happen to have the model number/style that you used?

Paul

Awesome!

Very nice job. Wish I had the patience and time for such a project.

Thanks for the photos and descriptions.

Paul

I've rebuilt a fuel pump using the kit that Swiss Army sells and it worked out very well. I also replaced the fuel pump axle (#7121085591) as the old one was grooved. I also had Thilo at T-Lo's Ultimate Offroad rebuild 2 pumps for me and both came back better than brand new and far better than anyth...

Does anyone know if this site is likely to return? Whois shows it is still an active site registration. It would be great to have it back.

Paul

Hi Scott, I spoke with Bobbi at Doetsch who I thought checked with the engineers but I'm not sure. Mine were built to use external reservoirs if I wanted to add them later but I doubt that has any effect on their orientation. Since your info is later then mine I'm going to flip over my rear shocks s...

#4 - What orientation are they mounted? There is some incorrect information out their that the HV1's can be mounted upside down...this is not correct and can lead to valving problems. Scott, I purchased my HV1's direct from Doetsch before you were carrying them and they told me that they could be m...