THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Nice work Jim... got pics of the fuel systems timing sensors?

What tools are yall using in clutch removal / aligment?

I damand pics and a wiring diagram!

Schweet!

Foz,I knew you would catch me before I could post pics! They're coming but not until next week after "maiden voyage". TTFN,mark

OK.. but if they aint up in a week, this will go on your permanent record!

Pics

I used a Primepact 50 g

http://www.northerntool.com/webapp/wcs/ ... _200028324

and pulled from the main tank as a fuel source [just like the Eberspacher heater]

Added one of these for noise and spark arresting

http://www.jackssmallengines.com/strapmain.cfm

Also check the electrical connection to the locker.

I bought the kit from EI.. works fine, came out like this: http://216.77.188.54/coDataImages/p/Groups/251/251203/folders/188315/1419225DSCF0294.JPG http://216.77.188.54/coDataImages/p/Groups/251/251203/folders/188315/1419226DSCF0295.JPG http://216.77.188.54/coDataImages/p/Groups/251/251203/folders/1...

I have a 710k in Florida... and use on of these http://www.flagshipmarine.com/rooftopac.html 110v provided by one of these: http://www2.northerntool.com/product/200028324_200028324.htm works like a champ. http://216.77.188.54/coDataImages/p/Groups/251/251203/folders/210434/1793665gen.jpg http://216....

Thanks - I was told the other day that I had my truck "crackered up - but good."
I couldn't deny it.

Call a local commercial trucking parts and accessories supplier with the part numbers... they we be a lot cheaper then the NAPA quotes I have heard.

I used a hole saw to cut a hole next to the stock lights - connected a ring under one of the stock light's bolts for a ground and tied the other leads into the stop and turn signal circuts respectively. The Stock lights are still 100% original... the new LED just augment the signals. I used the grom...

http://www.buytruckstuff.com/s_product_ ... category=2

I've been using em for a couple of years... very nice IMO.