EFI.
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
-
- Posts: 234
- Joined: Tue Sep 13, 2005 11:30 pm
- Location: Cleveland Georgia
- Contact:
Correct my 712 is currently fitted with EFI now I'm trying to fit a 710.
If you have any Nikies setting around send them this way.
I noticed LN is no longer advertising them.
Jim reading through the Transit manual they recommend the coil overs replaced ever 90k same with the ls1? After market replacement coil over go for thirty-six buck have a spare in the tool box doesn't seem like a bad idea.
Plus getting rid of the single coil allows for a more get home friendly setup. The pinz will limp home on three cylinders maybe two.
If you have any Nikies setting around send them this way.
I noticed LN is no longer advertising them.
Jim reading through the Transit manual they recommend the coil overs replaced ever 90k same with the ls1? After market replacement coil over go for thirty-six buck have a spare in the tool box doesn't seem like a bad idea.
Plus getting rid of the single coil allows for a more get home friendly setup. The pinz will limp home on three cylinders maybe two.
- audiocontr
- Posts: 1868
- Joined: Fri May 01, 2009 1:30 pm
- Location: Buffalo NY
-
- Posts: 234
- Joined: Tue Sep 13, 2005 11:30 pm
- Location: Cleveland Georgia
- Contact:
-
- Posts: 234
- Joined: Tue Sep 13, 2005 11:30 pm
- Location: Cleveland Georgia
- Contact:
Donnie, Glad you are enjoying my old truck.. I sure do miss it, but i haven't had time to enjoy it anyway..
I know of 9 of my kits that are up and running, thats 50% of what we produced.. Of those there have been a few issues to work through, but we've tackled them as they have popped up.
Man I am glad to have that behind us!!
I know of 9 of my kits that are up and running, thats 50% of what we produced.. Of those there have been a few issues to work through, but we've tackled them as they have popped up.
Man I am glad to have that behind us!!