Can anyone point me to a replacement rubber boot that holds the speedometer and fuel gauge light in place? I had one just deteriorate.
They look like they could be generic rubber parts, but it is required to secure the instrument bulbs in place.
Thanks.
Rubber parts
Rubber parts
'74 710K (ÖBH Austrian Rehab) mostly unmolested original - the unicorn (everything works!)
collecting pinz docs since 2012 - pm me if I can help
collecting pinz docs since 2012 - pm me if I can help
Re: Rubber parts
I just had the same problem and bought some from McMaster, 6448K29 , 11.17 for a pack of 50
You'll need to shorten them a bit with a scissors or knife and cut a hole in the end for the wire.
They really only help to hold the bulbs in, you may need to squeeze the bulb socket sleeve a bit tighter also.
If you'd like, pm me your address and I'll mail you some since I've got way more than I need.
You'll need to shorten them a bit with a scissors or knife and cut a hole in the end for the wire.
They really only help to hold the bulbs in, you may need to squeeze the bulb socket sleeve a bit tighter also.
If you'd like, pm me your address and I'll mail you some since I've got way more than I need.
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
_________
'73 Swiss 710M
'89 Puch 230GE
Re: Rubber parts
I looked at McMaster and could not find anything, but the rubber cap did not cross my mind. I'll send you a pm. Pack of 50 is enough for 25 pinzgauers.
'74 710K (ÖBH Austrian Rehab) mostly unmolested original - the unicorn (everything works!)
collecting pinz docs since 2012 - pm me if I can help
collecting pinz docs since 2012 - pm me if I can help