Stuck Distributor

Engine troubles? Try here.
Post Reply
MLyeder
United States of America
Posts: 10
Joined: Mon Jan 12, 2015 8:34 pm
Location: Northwest Illinois

Stuck Distributor

Post by MLyeder »

I am trying to install a PinzSSI ignition, but can't get the distributor out.
It is frozen in solid, doesn't turn or move in any direction.
The bolts are loose and I have been applying liquid wrench to it, but no luck.

Anyone have any tips/suggestions on what to do or not do to get it loose?

Thanks for any help.
User avatar
pcolette
United States of America
Posts: 1614
Joined: Sun Dec 10, 2006 7:38 pm
Location: Southwest Wisconsin

Re: Stuck Distributor

Post by pcolette »

Not an uncommon problem. I had one that took me 2-3 days of penetrating oil and many taps using a hammer and a wood block to protect the distributor. Try taping in one direction and than the other. Also if you can find a large hardwood dowel you may be able to tap it from beneath. Once it begins to move keep applying the oil and alternating the directions of tapping. If it comes up slightly, add more oil and then tap it down again to help the oil penetrate. Once out I cleaned the opening with 000 steel wool and then lightly oiled it to stop any new rust.
Good luck and be patient.
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
User avatar
edzz
United States of America
Posts: 1309
Joined: Tue Aug 11, 2009 12:13 am
Location: Coeur d'Alene, ID

Re: Stuck Distributor

Post by edzz »

Cum catapultae proscriptae erunt tum soli proscript catapultas habebunt.
MLyeder
United States of America
Posts: 10
Joined: Mon Jan 12, 2015 8:34 pm
Location: Northwest Illinois

Re: Stuck Distributor

Post by MLyeder »

Thanks to all for the suggestions.

I will keep working on it subject to weather here.

Marty
Post Reply