Transmission filler threads stripped

Diffs, axles, lockers, transmissions, portals, that kind of thing.
Post Reply
JimmyC
Posts: 217
Joined: Tue Feb 18, 2014 4:59 pm
Location: Lafayette, LA and Highlands, NC
Contact:

Transmission filler threads stripped

Post by JimmyC »

When I was checking my transmission oil I found the threads in the aluminum rear gearbox casing (710.1.21.522.1) where the reduction plug (900.19960) were mostly stripped.This is the highest plug, where you are suppose to put oil in. Has anybody found a way to fix this without tearing the transmission down?
Jim Chance
710M

All my post fully incorporate the Dunning-Kruger effect
User avatar
rmel
United States of America
Posts: 1394
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Transmission filler threads stripped

Post by rmel »

All the aluminum castings have stainless steel helicoil inserts for strength.
I don’t now what actual brand insert they used. But look to see if the insert
Is in place or broke. If it’s not intact you may be able to pick out any
remaining pieces. If the threads for the insert are ok you can insert a new one.
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
Post Reply