With due appology to whomwever I plagiarized this picture from, please help me with the name and partnumber of the red bar (left one, looking from rear to front) that goes from the steering to the tire (tierod?) for a 710. I bent mine yesterday delivering humanitarian help to the south coast (your west coast) of Guatemala. Drove 600k for what is ususally is a 200k drive to gain access, sat 13 hours almost continuosly in the vehicle.
Go figure, on friday it rained an inch of black sand from the Pacaya vulcanoe, and from Saturday on we were hammered with rain from tropical storm Aagatha. Finally sun out today. Never a dull moment.
Please help me name this part
-
- Posts: 206
- Joined: Mon Sep 28, 2009 11:36 am
- Location: WHIDBEY ISLAND
-
- Posts: 1776
- Joined: Fri Apr 16, 2004 8:08 am
- Location: Blue Mounds, WI
Karl,
I bent mine on a tree last year. I straightened the bent center section using a hydraulic tubing bender. (It seemed to keep the tube from collapsing under pressure.)
I'm sure a new one would be better. But I realligned the front wheels and it seems to be working fine, at least at the speeds I drive.
I bent mine on a tree last year. I straightened the bent center section using a hydraulic tubing bender. (It seemed to keep the tube from collapsing under pressure.)
I'm sure a new one would be better. But I realligned the front wheels and it seems to be working fine, at least at the speeds I drive.