Page 1 of 1
Hub Steps
Posted: Mon Mar 31, 2014 8:48 pm
by Pinz710m2
I know this has been covered a bunch, but nothing recently.
The last post I read suggested CWR as the only source for
hub steps, but it seems to me I saw them somewhere else.
There was a set with treading welded on, for extra traction.
What is the best source for hub steps these days? Or ...
again ... am I best off making my own?
Re: Hub Steps
Posted: Mon Mar 31, 2014 10:26 pm
by rmel
T-Lo's
http://www.mogsrus.com/
Although I have the CWR flavor and a set
of Helicopter hub pick up's rare and not good
as a step.
Re: Hub Steps
Posted: Mon Mar 31, 2014 11:57 pm
by EmbarkChief
Talk to Andre, he supplied the set on my Pinz and I couldn't be happier. Whatever you do stay away from CWR unless you like to throw money away.
Re: Hub Steps
Posted: Tue Apr 01, 2014 6:13 am
by berger
I followed Morris' advice and mine have been going strong since.
krick3tt wrote:I've made the hub steps made from floor flange and pipe nipple and have had them for years. Made them for about $8 in parts from Home Depot. Put non skid on them and drilled a hole through the end and use a phillips screwdriver to spin them off if I am going to be in rocks.
I know everyone is all in a tizzy about spending upwards of $125 for parts for their pinz but these have done well for me for years.
Re: Hub Steps
Posted: Tue Apr 01, 2014 9:32 am
by krick3tt
PM me your email and I'll send you pics
Re: Hub Steps
Posted: Wed Apr 02, 2014 3:39 am
by Fentonite
I bought a set from CWR. I haven't installed them yet, but they look great, and he had them in stock. He even included neoprene gaskets to be sure of proper fitment. I'll post pics if anybody wants.