elastic cord material question

texas pinzgauer · Post by **texas pinzgauer** » Thu Dec 16, 2010 1:58 pm

A couple of the rear "tie-downs" have broken so I need to replace the elastic cord on a couple of these individual canvas hold downs or latches.

I know it's been posted before but what's the source for this material (sold by the foot or meter I presume) and what's the process by which I would cut it to length and then somehow crimp or finish off the ends?

Any wisdom on this subject would be very much appreciated.

krick3tt · Post by **krick3tt** » Thu Dec 16, 2010 4:02 pm

I know the cord comes from SAV but can't remember the price. Have also seen it on Ebay and when I was in Ramona Jim had some that he got from there.

The ear clamps can be gotten from Fastenal http://www.fastenal.com/web/search/prod ... 4z08&Nty=0

I got some from a hose installation company when I was in Seattle some time back. The old ones can be reshaped, but new is better. I crimp mine with a pair of end nippers similar to the ones used for putting up barbed wire fences.

pcolette · Post by **pcolette** » Thu Dec 16, 2010 5:01 pm

Both can also be sourced from McMaster-Carr. I think this is the cord, #9616K16 and these are the clamps, #54105K41 but I would measure both first to be sure.

http://www.mcmaster.com/#

Paul

audiocontr · Post by **audiocontr** » Thu Dec 16, 2010 8:29 pm

ebay usually had it for $25. otherwise here: http://www.autohaulersupply.com/index.p ... ail&p=4742

Solid core rubber rope

pinzinator · Post by **pinzinator** » Sun Dec 26, 2010 10:15 am

Ace Hardware sells a stretch cord that is similiar. Much cheaper and does the same thing. I'm sure Home Depot/Lowes does, too.