New hutchinson wheels and adapters

[ziegler]

Pics of wheels and adapter

[ziegler]

Adapters and wheels ordered though HEM industries in Dewey Oklahoma, ask for Jim. Metal rub rail, dual gas can holder, electric steering, solid state ignition, carb work, etc. done by the great Andre of Fat Fabrications in Mount Pleasant Tx.

[ziegler]

More pics of truck and log home truck built

[NEWFISHER]

Awesome!

[TechMOGogy]

Nice truck

[rmel]

Curious what size tires your running, my guess would be 285/75.

With the added extension, don't be too surprised to hear wheel
well rub on the front right side. Looks like you have about 2" of
clearance there.

That's been a tight spot for me with 8" wheels and 285/75. The
plus is you just increased your tip stability by 6% with what looks
like a +4" increase in overall track width.

[Haf-e]

Curious on the cost of these wheels here on the USA.

Found their website - HEM4x4.com -

[ziegler]

Cost was like 460.00 per wheel and the tires are 285/75.

[Haf-e]

Do you know the model number for those rims? They look like they might be the Gwagen military version possibly? They have a deeper backspacing compared to the civilian versions I am told.

[ziegler]

Contact Jim at 918 440 8636, he can give you the info needed. They look to have the same bs as my previous Promag wheels.

[ziegler]

I believe they are the WA 0491 model, double check with Jim. Hope this helps Zig

[Pols497]

Sweet looking 710. Mark I would like to talk to you about your 710. Call me 918 424 5651.

[waterdog]

any down side by using those kind of adapters for the wheels?????

[TechMOGogy]

just for interest sake- anohter usa manuf of adapters
http://www.motorsport-tech.com/special/truck/mercedes_s