Front door latch spring improvement

Build projects, things that guys have come up with to make a Pinz better (or worse?) and aftermarket add-ons.
Post Reply
User avatar
Haf-e
United States of America
Posts: 822
Joined: Thu Oct 06, 2011 5:25 pm
Location: Mount Vernon WA USA

Front door latch spring improvement

Post by Haf-e »

My front door latches have always been "lazy" in that they didn't latch well. Recently I had a door swing open when I slowed and turned and nearly hit a parked car... time to do something about it.
20170717_145158.jpg
20170717_145158.jpg (2.37 MiB) Viewed 1665 times
I disassembled the door and took the latch out. Cleaned.it all and lubricated the mechanism including the internal handle pivot and pull rod mechanism. Once reassembled it worked much better but the interior handle still didn't retract completely and the latching was not fully positive.

I looked in a spares box and found a suitable spring to add to the interior handle mechanism to ensure it fully retracts. The stock spring in the lock mechanism looked too hard to remove and match up and it is pretty indirectly connected to the interior handle. An additional spring was easier to add and worked better.

I drilled two small 1/8 inch holes - one inside the door and the other in the rod and added the spring. Now the interior handle snaps back nicely and let's the latch work as designed.

So I then went to an auto parts store to find a matching spring - here is what I used - it came with a second spring that works as a throttle return spring which is always good to carry. Cost was about $5 for the pair of springs...
20170717_144820.jpg
20170717_144820.jpg (2.09 MiB) Viewed 1665 times
The spring fits in well behind the door panels without any rubbing or noises.
Haf-e

1971 Pinzgauer 710M

Image
Disc Brake Conversion Kits for 710 and 712 Pinzgauers
www.klugewerks.com
User avatar
DeStoriesair
United States of America
Posts: 38
Joined: Mon Jan 05, 2015 9:02 pm
Location: Mesa, Az

Re: Front door latch spring improvement

Post by DeStoriesair »

I like that idea! I was going to be pulling my door panel off to add a Molle plate, maybe now I will include a spring :)
I had gone around a corner one time and my passenger door swung open, lucky enough I straightened out harder than normal and got it to shut :)
Southwest Pinzgauer Association Member
Pinzgauer 710M
http://www.swpinz.com
Facebook: Southwest Pinzgauer
Post Reply