Page 1 of 3

Smart Car Seats

Posted: Sun Nov 05, 2017 8:32 pm
by Bruce Berger
I picked up a pair of Smart Car For2 Passion seats this weekend. I'm curious to find out how others have mounted them in their Pinzgauers. Also I'm interested in finding out how to remove the air bags and seat belt guides. If the airbags are not easily removable what is the best way to safe them to minimize the chance of accidental activation.

Re: Smart Car Seats

Posted: Mon Nov 06, 2017 3:57 am
by Hotzenplotz
Bruce

My Smart seats did not have any airbags; so no activity from this side
I simply took an angle grinder and cut off the belt guides and painted the cutr with black.

Image

The adapter plate was water cut by a member of the German Pinzgauer forum. It has hooks at the front edge which fit precisely into the seat mounts, and a hole on the rear for the usual screw.

Image

Image

Re: Smart Car Seats

Posted: Mon Nov 06, 2017 7:37 am
by TechMOGogy
I too have Smart seats in my Pinz
Andre did the mount and they were just mounted to the stock Pinz frames - have pics but can't find them currently, will post if I find them.
Only passenger side shoulder belt guide need to be cut off

Re: Smart Car Seats

Posted: Tue Nov 14, 2017 5:30 pm
by Jake2015
Bruce, where did you get your seats? I'm in the market for a set.

Re: Smart Car Seats

Posted: Tue Nov 14, 2017 7:51 pm
by Haf-e
There is a seller in the SoCal who has them from the EV smart cars aND is selling them for $149 a pair right now - but shipping is pricey...

https://rover.ebay.com/rover/0/0/0?mpre ... 1446581699

Re: Smart Car Seats

Posted: Wed Nov 15, 2017 2:15 pm
by TechMOGogy
Took some pics last weekend
IMG_9615.JPG
IMG_9615.JPG (2.46 MiB) Viewed 9197 times
IMG_9616.JPG
IMG_9616.JPG (2.22 MiB) Viewed 9197 times
IMG_9618.JPG
IMG_9618.JPG (2.45 MiB) Viewed 9197 times
I sourced both my sets here: http://www.smartcarofamerica.com/forums/f11/

Re: Smart Car Seats

Posted: Thu Nov 16, 2017 7:22 pm
by 4x4Pinz
I have up making frames for after market seats and just use the pinz frames as is pictured above. Only requires cutting a few small welds and if for some reason they needed to be returned to stock just cut the new welds and reweld then on. I have used many different import seats just as long as they are under 19" wide and less then 3" tell at seat bottom they will fit the same as stock.

Re: Smart Car Seats

Posted: Sun Nov 19, 2017 7:58 pm
by Bruce Berger
All,

Thanks for the pics. I got my seats from the guy in El Cajon (San Diego area). He still has quite a few left. I was working on them yesterday and think I came up with a plan to mount them based on your input. I only wish I could weld. I wish Andre was still in SoCal to fab something up 8(

Bruce

Re: Smart Car Seats

Posted: Tue Aug 14, 2018 6:46 pm
by Sonarman
I got my seats from a guy dismantling Smart Cars. He was located in El Cajon. He had plenty left and still has some cars to dismantle. Autobahn dismantling, good guys if you can actually go there he will cut a deal.

Re: Smart Car Seats

Posted: Tue Aug 14, 2018 11:19 pm
by Lewis
Sonarman wrote: Tue Aug 14, 2018 6:46 pm I got my seats from a guy dismantling Smart Cars. He was located in El Cajon. He had plenty left and still has some cars to dismantle. Autobahn dismantling, good guys if you can actually go there he will cut a deal.
Thats where i got mine, they where like new, a little pricey on the shipping but then they had spent a lot of time boxing them so they didnt get damaged.

Image

Re: Smart Car Seats

Posted: Wed Aug 15, 2018 8:29 am
by stark311
How much do they raise the seating position? I have to kind of slouch down to see under the windshield header at stop lights, etc. I would love to have some modern seats, but can’t afford to sit any higher...


Sent from my iPad using Tapatalk Pro

Re: Smart Car Seats

Posted: Thu Aug 16, 2018 10:17 am
by Lewis
stark311 wrote: Wed Aug 15, 2018 8:29 am How much do they raise the seating position? I have to kind of slouch down to see under the windshield header at stop lights, etc. I would love to have some modern seats, but can’t afford to sit any higher...


Sent from my iPad using Tapatalk Pro
I don’t think mine make you sit any higher than stock however the front of the seat is slightly higher which helps if you have long legs (I don’t) .
for me it’s a real upgrade not only for comfort but for the safety of having a head rest.
I’ll take a better photo showing the hight and post it when I get home.

Re: Smart Car Seats

Posted: Thu Aug 16, 2018 10:53 am
by Lewis
Image
Image
Image

Re: Smart Car Seats

Posted: Thu Aug 16, 2018 2:45 pm
by stark311
Great info, thank you.


Sent from my iPad using Tapatalk Pro

Re: Smart Car Seats

Posted: Thu Sep 20, 2018 1:46 pm
by Texas710
Very excited to have sourced a pair of seats/frames, waiting on shipping quote on the smart car seats... This post got me motivated, few more days and some fabricating and I will be joining the new seat club!