Steering linkage replacement
Steering linkage replacement
Most every part of my steering linkage is worn out. Does anyone have any suggestions for replacement parts that are not original? Anything I can find in north america that would work for tie rod ends etc? Considering having someone fabricate a new steering linkage where I can use tie rod ends for domestic trucks instead but wondering if there's an easier solution.
Re: Steering linkage replacement
Easiest solution is place an order with EI or SAV.
No tinkering necessary, should last a very long time.
My $0.02
No tinkering necessary, should last a very long time.
My $0.02
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Re: Steering linkage replacement
Volvo Ron.rmel wrote:Easiest solution is place an order with EI or SAV.
No tinkering necessary, should last a very long time.
My $0.02
Fat Fabrications
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
Re: Steering linkage replacement
Dah! Caught by the inertia of having a Pinz head wedge
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Embarassed :oops:](./images/smilies/icon_redface.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK
Driver: Ron // KO0Q
- VinceAtReal4x4s
- Admin
- Posts: 2040
- Joined: Mon Apr 12, 2004 10:36 pm
- Location: Ca. or lost in South West USA
- Contact:
Re: Steering linkage replacement
Take your rods off and go to the local driveline specialists shop. They can measure your ends and likely find a match or make something close, maybe even nicer. I never replaced any before but wouldn't be surprised if a Land Rover part number matched up since the axles/brakes are British.
"For those who risk, life has a flavor the protected shall never enjoy"
Your donation makes this site possible!
![Image](http://www.real4x4.com/Avatars/303.JPG)
Your donation makes this site possible!
Re: Steering linkage replacement
ProGi make good replacement rod ends, I have been running them for some years now with good results.
They also make CV boots and diff lock diaphragms.
Eric
They also make CV boots and diff lock diaphragms.
Eric