C30x transmission length?
C30x transmission length?
Just wondering if someone has easy access to a tranny to measure the length from the front of the bellhousing to the transfer case mounting surface. Thanks.
Re: C30x transmission length?
Anyone? With the wealth of knowledge on this board somebody must know.
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
Re: C30x transmission length?
I'll get a measurement tommorrow.
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
Re: C30x transmission length?
Exactly 40cm from front of bell housing to transfer case mating surface
Re: C30x transmission length?
Thanks Jim! Just doing some research and that helps me out. They sure are short trannys aren't they.Jim LaGuardia wrote:Exactly 40cm from front of bell housing to transfer case mating surface
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
Re: C30x transmission length?
Bell housing is 15cm, trans is 25mm from front mating surface to the transfer case mounting surface. Standard ZF gearbox size for that era.