Seat belts for E track ?

tokarev · Post by **tokarev** » Thu Apr 05, 2007 12:25 pm

Who makes the lap belts that work with the E-track? Finally got around to buying the E-track.

Heed · Post by **Heed** » Thu Apr 05, 2007 1:49 pm

I picked up mine from Wesco Performance in California. They have an olive drab coloured belt which goes great with the truck. I then ordered some E-track clips from Mackie's on e-bay. I had a shop cut the belts and sew on the E-track clips.

The system works great and looks like it was made for the truck.

Belts

http://www.wescoperformance.com/seat-belts-sitemap.html

E-track fittings:

http://stores.ebay.com/Mackie-Enterpris ... ubZ1834129

Both were very accomodating.

todds112 · Post by **todds112** » Thu Apr 05, 2007 11:33 pm

Those are good prices on the lap belts. Cheapest I found prior was at 4WD.com and they were 19.95 each.

ExpeditionImports · Post by **ExpeditionImports** » Sat Apr 07, 2007 12:34 am

We stock the e-track seatbelts. Aircraft lift buckle, very nice quality. Price runs $30 each in stock. They can be pictured here:

http://www.expedition-imports.com/Kille ... G_1230.JPG

Cheers,

Scott

justfred · Post by **justfred** » Sat Jun 02, 2007 4:37 pm

The website for ex imports doesn't seem to show these. Are they still available?

Pinz Enthusiast · Post by **Pinz Enthusiast** » Sat Jun 02, 2007 5:09 pm

Those are some nice looking belts, just about choked on the price though, I fonund mine off ebay from a military supplyer, same belts slated for a chinook chopper, only cost me $8.00 a pair 12 pairs for my 712, and they are ANSI and DOT rated on the belts

ExpeditionImports · Post by **ExpeditionImports** » Sun Jun 03, 2007 10:52 pm

Yes we inventory the belts. Not currently listed on the webstore, but they are in stock. Give us a call or drop us an email.

Pinz Enthusiast, your surplus chopper belts have the e-track ends? So add in the 2 e-track fittings and find a shop that will put them together....oh yah, make sure they will certify them for passenger use....., add in your shipping, time to coordinate, etc..., no question you saved a few bucks, but really $30 for a custom belt, is not out of line.

I'll go back to counting my millions at the dinner table.....

Cheers,

Scott

krick3tt · Post by **krick3tt** » Mon Jun 04, 2007 9:23 am

Same thing with motorcycle helmets...$10 helmet for a $10 dollar head.
These are for the safety of your passangers that may be your family members, give them some safety and care.
Just my .02

Cheers,
Morris

Heed · Post by **Heed** » Mon Jun 04, 2007 12:48 pm

I took my belts to a mountaineering shop. They used an industrial sewing machine to add the e-track ends. I was comfortable with them because I know their work through rappelling, etc.

Scott's product would have enticed me if he had it at the time. I went with the Wesco ones because I could get them in olive drab green. Combined with the chrome aircraft-style lift...they look great!

I guess it all comes down to paying for convenience (and safety if you don't know the people doing the sewing for you!)

Best of luck!

surftodd · Post by **surftodd** » Mon May 11, 2009 12:51 pm

Does anyone have a photo of the etrack with seat belts in their truck? I am a little concerned about drilling through the body a hundred times to screw/ rivit down the etrack. Is their another way to laty it solidly in the rear? Just looking for ideas- Thanks

Heed · Post by **Heed** » Tue May 12, 2009 8:18 am

surftodd,

Send me an e-mail directly and I'll send you some pics of how I did mine.

THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!