For Sale : 710K Rear Seats -3 Available-

[swashplate]

For Sale:
QTY-3
Rear Seats PN 7131790000/95
Group 23-05-13

Price New Approx 325 each

Very Good Condition

My Price 200 each

Accept Pay Pal

Shipping to Lower 48 from ZIP 89511

[mneil]

Hi, these are the 2nd row (forward facing) seats, right? Do you know if they can be bolted in a 710K in lieu of the table? I think I've seen pictures of them in that configuration. Do these come complete with all the brackets, etc. necessary to do that?

Thanks!

[westernair]

Hi, these are the 2nd row (forward facing) seats, right? Do you know if they can be bolted in a 710K in lieu of the table? I think I've seen pictures of them in that configuration. Do these come complete with all the brackets, etc. necessary to do that?

Thanks!

Yes you can mount these seats in revese up against the devider wall, you can then also put a pair of M seats on the sides making it a 9 passanger truck. This is what I did to my old K.

[swashplate]

Hi, these are the 2nd row (forward facing) seats, right? Do you know if they can be bolted in a 710K in lieu of the table? I think I've seen pictures of them in that configuration. Do these come complete with all the brackets, etc. necessary to do that?

Thanks!

I can take photos tonight and post them. I hope this will answer some of your questions.


Sent from my iPhone using Tapatalk

[mneil]

Photos would be great - - thanks!

Interesting on the M seats in the rear. Unless I'm missing something, then it becomes a 12 passenger truck - - 2 up front, 6 in the double rows in the back and then 4 in the 2 inward facing M seats in the far back.

Not sure I need a bus, though! I'm just thinking of replacing the pretty much useless table with a row of seats.

[westernair]

2 along each side in the back and 3 behind the front seats = 7 rear seats then the 2 seats up front equals 9 total.
Better then your average mini van!

[swashplate]

ImageUploadedByTapatalk1363796635.050418.jpg

ImageUploadedByTapatalk1363796667.442978.jpg

ImageUploadedByTapatalk1363796688.876036.jpg

Sent from my iPhone using Tapatalk

[westernair]

Example of how I did my old truck

[TechMOGogy]

Photos would be great - - thanks!

Interesting on the M seats in the rear. Unless I'm missing something, then it becomes a 12 passenger truck - - 2 up front, 6 in the double rows in the back and then 4 in the 2 inward facing M seats in the far back.

Not sure I need a bus, though! I'm just thinking of replacing the pretty much useless table with a row of seats.

Not sure that would work in a 710K?

[mneil]

Are there brackets or something that would be needed with these seats to mount them in the rearward facing position (facing the ones already in a 710K)?

[swashplate]

Are there brackets or something that would be needed with these seats to mount them in the rearward facing position (facing the ones already in a 710K)?

It looks like one would have to be fabricated or use the one from the front facing version since an aft facing position is not a normal configuration.

[mneil]

Hi, I'm still interested in these if they are still available and if they come with the bracketry, etc.

I have now removed the table and am ready to think about mounting these seats in a rearward facing position.

Also, do you have the seat belt stuff?

Thanks.

[swashplate]

The only parts I have are the seats (frames,hooks,rubber straps, pads)

I don't have the seat belts or the part in the truck that they mount too.

On the bright side it does look easy to make your own mounts out of metal stock.
Here are the rear mount tabs.

ImageUploadedByTapatalk1365475504.675787.jpg

Sent from my iPhone using Tapatalk

[swashplate]

And here is the front tabs

ImageUploadedByTapatalk1365475809.031823.jpg

Sent from my iPhone using Tapatalk

[mneil]

Okay, can we connect privately to discuss logistics? Can you pm or email me (mark.neil AT verizon.net)?

Thanks,
Mark