Wheel Spacers 1 inch thick - Pinzgauer 5x160

[Haf-e]

Up for sale is a set of four custom made 1" / 25mm thick wheel spacers for the use with a 710M Pinzgauer - they include 20 of special lug nuts for mounting the spacers to the stock wheel studs of the Pinzgauer. These were made up for a friend's stock Pinzgauer wheels in order to increase the track width for better stability - but he just ordered a new set of wheels instead and will not need these now.

Moving the wheels outward slightly when using taller 33" tires keeps the tire's "contact patch" in the correct location and reduces wheel scrub / hard steering. No permanent modifications are required - they simply bolt on.

The spacers where made in the USA by a professional adapter company and are serialized. They cost $300 for the set. These adapters are in new condition with just mounting scratches - They have not been used other than test fitting them.

Looking for $250 for the set of four + the tapered lug nuts shipped.

I'll work on getting some pictures up on these soon.

[stiffler4444]

PM'd, would love to take them off your hands

[stiffler4444]

Sent a couple PM's. sorry if duplicated but it's hard to tell what's sent and what's pending

[Haf-e]

Got them - replied back. I consider these ones to now be SOLD.

[stiffler4444]

Hi Christopher, if you could PM me your address I'll get things taken care of. My message system is acting up and returning my messages to me, so not sure if you got my request yesterday.

thanks Dave

[Haf-e]

PM sent.

[stiffler4444]

Ya, not getting my PM's definitely. Something is a miss. Please send me an email to my personal account, which is stiffler4444@hotmail.com. Let the spamming begin...lol.

[David Dunn]

Ya, not getting my PM's definitely. Something is a miss. Please send me an email to my personal account, which is stiffler4444@hotmail.com. Let the spamming begin...lol.

Check each of your PM folders, that are probably max'ed out

[stiffler4444]

OK will do, thanks

[Daly944]

Any chance you have the full specs needed to order another set of these? I've contacted US Wheel Adapters.com to make them, but need the following info:

5x160 is the proper pattern I believe (based on this thread)

What is the stud size/thread pitch?

Hub diameter

Maximum thickness that the stock logs can accommodate (is it 1 inch)?

[rmel]

You may want to contact Lenny at Motorsport Technology https://www.motorsport-tech.com/

I do have some good reason to believe his shop fabricated these Wheel spacers for Kludgeworks.
Haf-e has long vanished from the forum to ask him directly.

[Daly944]

Awesome, thank you for the reply!