1972 710m
1972 710m
Super clean 710m . I purchased this Pinz in 2005 from Cold War Remarketing. Garaged most of the time I have owned it.
No rust.
interco trxus tires
cepek wheels (5)
spare tire mount for larger wheel
hub steps
petronix , civilian plugs
dot glass and tail lights
24 to 12 volt reducer
rancho shocks
procomp steering stabilizer
2 different tops over bed
Much more . I will post a few pics and can send more pics upon request
$15500
Thanks
Tom (214) 244-7935 Dallas Tx
No rust.
interco trxus tires
cepek wheels (5)
spare tire mount for larger wheel
hub steps
petronix , civilian plugs
dot glass and tail lights
24 to 12 volt reducer
rancho shocks
procomp steering stabilizer
2 different tops over bed
Much more . I will post a few pics and can send more pics upon request
$15500
Thanks
Tom (214) 244-7935 Dallas Tx
- audiocontr
- Posts: 1868
- Joined: Fri May 01, 2009 1:30 pm
- Location: Buffalo NY
Re: 1972 710m
VERY nice looking 710!
1973 712m
1968 Haflinger
1965 Pathfinder
1978 GMC Palm Beach (Hey, its got 6 wheels!!)
1968 Haflinger
1965 Pathfinder
1978 GMC Palm Beach (Hey, its got 6 wheels!!)
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: 1972 710m
Very sharp looking truck! I may have to borrow your bed cover idea
Paul C.
_________
'73 Swiss 710M
'89 Puch 230GE
_________
'73 Swiss 710M
'89 Puch 230GE
Re: 1972 710m
I made the cover out of the vinyl material that you see on the side of semi trailers. You use a special glue to put it together.
The bows are electrical conduit. I used a conduit bender to shape them. I used the existing holes in the bed to secure the bows.
The cord is the same as the original. The loops that the cord goes thru are pieces of the vinyl material pop riveted to the top.
This top has been on the truck for about 6 years. I was amazed how durable it is and how well the glue fuses two pieces of vinyl together.
Let me know if you need any more info
Tom
The bows are electrical conduit. I used a conduit bender to shape them. I used the existing holes in the bed to secure the bows.
The cord is the same as the original. The loops that the cord goes thru are pieces of the vinyl material pop riveted to the top.
This top has been on the truck for about 6 years. I was amazed how durable it is and how well the glue fuses two pieces of vinyl together.
Let me know if you need any more info
Tom
Re: 1972 710m
Which wheels are those?
Sent from my PRC-104 using phonetics
Sent from my PRC-104 using phonetics
Re: 1972 710m
Dick Cepek made these wheels for the H1 and Pinz. I don't know if you can get them anymore.
- cascade.king
- Posts: 262
- Joined: Fri Mar 08, 2013 6:41 am
- Location: Vermont, USA
Re: 1972 710m
Where does one find that vinyl fabric and glue?
Mike
1971 North American 700AP Haflinger Pathfinder
1971 North American 700AP Haflinger Pathfinder