The 2007 Spring 'Tucky Treffen is the first weekend of May. May 3 to 6. Some of us will likely be there on Tuesday.
John Geesen
937-694-1543
http://www.pinztrek.com/pinztreffen/ky/
2007 Spring 'Tucky Treffen May 3-6
2007 Spring 'Tucky Treffen
Hey. Sounds like fun if I can get my daughter to let my son-in-law come with me. Is anybody invited?
Cory Gray
Cory Gray
I hope to make it !
I plan on going. As far as I can tell I have the only pinz in about a 200 mile radius and would love to meet others who understand.
Scottie
Scottie
Spud gun loaded up.
I'm off to the treffen tomorrow. There will be a couple of us there by
Tuesday night. We will be camping at the Flats instead of the cave -
but we may wind up there. To get to the Flats - on 1639 take a left
just past mile marker 3 on to Sand Lick Road - go until you get to the
first creek (crick) crossing we will (should) be on the left. You can
get trailers and campers/RVs to this site - only the last mile or so
is dirt road.
Here is what I got when I put the grid coordinates into Google Maps
(n37 46 w83 43.3)
http://www.google.com/maps?q=Slade,+KY, ... iwloc=addr
I'll see some of you there.
John Geesen
937-694-1543
I'm off to the treffen tomorrow. There will be a couple of us there by
Tuesday night. We will be camping at the Flats instead of the cave -
but we may wind up there. To get to the Flats - on 1639 take a left
just past mile marker 3 on to Sand Lick Road - go until you get to the
first creek (crick) crossing we will (should) be on the left. You can
get trailers and campers/RVs to this site - only the last mile or so
is dirt road.
Here is what I got when I put the grid coordinates into Google Maps
(n37 46 w83 43.3)
http://www.google.com/maps?q=Slade,+KY, ... iwloc=addr
I'll see some of you there.
John Geesen
937-694-1543
-
- Posts: 1776
- Joined: Fri Apr 16, 2004 8:08 am
- Location: Blue Mounds, WI
Hey you guys, sure sounds like fun. I wish it were a shorter commute from Wisconsin....
Speaking of Spud Guns, I've got a friend, a blacksmith, who made a spud gun from steel. It burns oxy/accetaline (sp?) for fuel. I've witnessed it blow through both windows of a Volvo (accidentally), just about blow a hole through said Volvo's door (intentionally), and heave a spud over 3/10 of a mile! And that was with a "tame charge".
Somehow, ya just can't beat blowing things up.
Have a fun weekend.
Paul
Speaking of Spud Guns, I've got a friend, a blacksmith, who made a spud gun from steel. It burns oxy/accetaline (sp?) for fuel. I've witnessed it blow through both windows of a Volvo (accidentally), just about blow a hole through said Volvo's door (intentionally), and heave a spud over 3/10 of a mile! And that was with a "tame charge".
Somehow, ya just can't beat blowing things up.

Have a fun weekend.
Paul
Oxy/Acetylene WILL DESTROY a PVC spud gun, it's shooter and anyone else with the lack of better judgement to be in the near vicinity. I know someone who tried this - tore up his face, arm and torso. I'm partial to propane or mapp gass - cheaper and cleaner than hair spray.
That bit of warning aside - the spud gun helps keep the kids entertained.
I have some flour experiments I am looking foreward to testing this week
That bit of warning aside - the spud gun helps keep the kids entertained.
I have some flour experiments I am looking foreward to testing this week
