THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

Ok had a leak coming from the oil filter. Took the metal cap off and determined it was the seal. When going to grab a replacement from a new filter I notice it is extremely thinner and paper not rubber. The original one is maybe .150" thick rubber and the replacement Is at best .050" paper. I know that it is specked for a Mann c8246 but I can only get Baldwin p106-hd filters locally
So my question is can I use the thin paper one, do need to order a Mann hoping it has the correct one or do I have to find a replacement seal by its self.
Here are a few pics

Humm digging through my spars I found one in the valve cover gasket stack.
Still interested in knowing for future.

Shawn,
My cross-references for the cartridge-type Haflinger oil filters are as follows:

Mann H 601
Mahle OX 42
NAPA Gold 1314

Of the three, only the NAPA filter comes equipped with the large flat O-ring you are trying to source.

Hope this helps.

Take care.

Jim Molloy
Waldersee Farm
http://www.northwestmogfest.com

In the past I just ordered a handful from Robert so I have them in stock
http://www.puch500.at/?action=dichtungen
dip 38 (501.1.07.060.1)