Well actually about the the intermediate case - what is #19 for?
Front Case Question
Moderator: TechMOGogy
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Front Case Question
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
Re: Front Case Question
Front drive engagement fork pivot.
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: Front Case Question
Is how to adjust it in the manual - didn't see it but may have missed it?
Thx
Thx
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
Re: Front Case Question
My advise is to count the turns out and use that as starting point to adjust fork/collar centering.(only final adjust after mated with central tube/drive line). The pin centers and limits side play of collar, 1-1/12 turns out from seated (while engaged)should work fine.
It will not engage if off center
It will not engage if off center
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada