My original jack needs to be refurb'd, and I'm a bit pressed for time. Has anyone used a US Jack bottle, like this?
http://www.goestores.com/storename/usja ... 97362.aspx
Leaving price out the equation.... any comments on quality, height, durability?
Need a new bottle jack
- Jack Russell Racing
- Posts: 90
- Joined: Wed Aug 21, 2013 10:30 am
- Location: Winston-Salem, NC
- Contact:
Need a new bottle jack
Ricambi America. The Ferrari, Maserati, Lamborghini Parts Specialists
-
- Posts: 1776
- Joined: Fri Apr 16, 2004 8:08 am
- Location: Blue Mounds, WI
Re: Need a new bottle jack
It doesn't seem to have the same rounded base on it as the original. That seems like a big concern, considering how the axles swing.
Re: Need a new bottle jack
A base could be fabricated along with the top to hold the curved section of the axle. With a little welding a reasonable substitute could be fashioned.
I am sure it could suffice in an emergency situation if the piece is used for the base that is in the bottom of the tool box. Hopefully you have that.
I am sure it could suffice in an emergency situation if the piece is used for the base that is in the bottom of the tool box. Hopefully you have that.
Any man who thinks he can be happy and prosperous by letting the government take care of him:
better take a closer look at the American Indian.---Henry Ford
better take a closer look at the American Indian.---Henry Ford
Re: Need a new bottle jack
I think this may be a closer match if your looking for something in a hurry.
http://www.grainger.com/product/WESTWAR ... =P2IDP2PCP
http://www.grainger.com/product/WESTWAR ... =P2IDP2PCP
Fat Fabrications
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
2993 FM 1647
Winnsboro, TX. 75494
fatfabrications@yahoo.com
(903) 365-2332 shop
(951) 765-7224 mobile
Facebook.com/dokapinz6x6
Www.fatfabrications.com
-
- Posts: 74
- Joined: Sun May 31, 2009 10:53 pm
- Location: Culver City, CA
Re: Need a new bottle jack
The bottle jack at Grainger is Chinese, so of unknown (and probably suspect) quality. Since a bottle jack is most often used away from home when a floor jack and jack stands aren't available, it's not worth risking an injury.
Chris
'74 710K
'74 710K
- Jack Russell Racing
- Posts: 90
- Joined: Wed Aug 21, 2013 10:30 am
- Location: Winston-Salem, NC
- Contact:
Re: Need a new bottle jack
I ended up with this saddle:
http://bmihydraulics.com/index.php?page ... &Itemid=23
and a jack from BMI too:
http://bmihydraulics.com/index.php?page ... &Itemid=23
(I realize the bottle is not made in the USA, but trust the supplier that it'll suffice for my short term needs)
http://bmihydraulics.com/index.php?page ... &Itemid=23
and a jack from BMI too:
http://bmihydraulics.com/index.php?page ... &Itemid=23
(I realize the bottle is not made in the USA, but trust the supplier that it'll suffice for my short term needs)
Ricambi America. The Ferrari, Maserati, Lamborghini Parts Specialists
-
- Posts: 1776
- Joined: Fri Apr 16, 2004 8:08 am
- Location: Blue Mounds, WI
Re: Need a new bottle jack
It's even blue.