710M rebuild
Re: 710M rebuild
Sounds great! I did it this year and plan to go again. A cakewalk for a Pinz.
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: 710M rebuild
This roaming rally looks great. No ego required, just a Pinzgauer and some friends!
1972 710m
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: 710M rebuild
Swisha Loop is on my list as well - starting easy before hitting Gravenhurst rocks ![Smile :)](./images/smilies/icon_smile.gif)
Overlanding is perfect in a Pinz as the back is a great sleep/storage platform.
http://caltopo.com/m/D68E
![Image](http://overlandquebec.com/images/EOS_7D_0682.jpg)
![Smile :)](./images/smilies/icon_smile.gif)
Overlanding is perfect in a Pinz as the back is a great sleep/storage platform.
http://caltopo.com/m/D68E
![Image](http://overlandquebec.com/images/EOS_7D_0682.jpg)
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: 710M rebuild
Where did the matching diamond plate door panels come from? I would love to have me some of them for the front and back doors on my 710K.
FDNY 343
Always remember 9/11/2001
Always remember 9/11/2001
-
- Posts: 776
- Joined: Mon Mar 15, 2010 1:46 pm
- Location: Crystal Beach ON CAN
Re: 710M rebuild
Not sure about these ones, but I know Knuckledown has them on their website.scoot wrote:Where did the matching diamond plate door panels come from? I would love to have me some of them for the front and back doors on my 710K.
1972 710m
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: 710M rebuild
knuckledown is dead
Andre fabricated mine and can make them for you and powder coat if you like.
Andre fabricated mine and can make them for you and powder coat if you like.
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: 710M rebuild
Out Friday in the Pinz as it was a wonderful 70+ degrees out (today is in the low 30's)!!
My daughter and I stopped to get a road side snack and were eating in the back, or at least trying to eat... every couple of minutes someone would come up and comment or ask a question about the truck. My daughter loved answering all the questions and corrected a few that thought it was a Mog
. I enjoyed watching my 10 year old explain things!
Two women, who are starting a tour company up North, made me an offer to buy it.
Such a blast to drive and I enjoy meeting people who are interested in it.
Still fine tuning the EFI setup as it runs to rich when hot, so I am doing some crash course learning of EFI programming/adjustment.
My daughter and I stopped to get a road side snack and were eating in the back, or at least trying to eat... every couple of minutes someone would come up and comment or ask a question about the truck. My daughter loved answering all the questions and corrected a few that thought it was a Mog
![Smile :)](./images/smilies/icon_smile.gif)
Two women, who are starting a tour company up North, made me an offer to buy it.
![Shocked :shock:](./images/smilies/icon_eek.gif)
Such a blast to drive and I enjoy meeting people who are interested in it.
Still fine tuning the EFI setup as it runs to rich when hot, so I am doing some crash course learning of EFI programming/adjustment.
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: 710M rebuild
Get used to offers to buy it. I average one per outing. Did get 4 one weekend. I've even had people follow me into parking lots to ask questions.
After driving the older 6 Vets in the Remembrance Day parade I ended up with 5 of their great-grandchildren filling all the empty seats for the trip back to the Legion for lunch. BTW parade speed was low range, 1st gear, not much above idle.
After driving the older 6 Vets in the Remembrance Day parade I ended up with 5 of their great-grandchildren filling all the empty seats for the trip back to the Legion for lunch. BTW parade speed was low range, 1st gear, not much above idle.
Re: 710M rebuild
I stop any offers to buy my Pinz... instantly .. by comment on "9 miles per gallon" fuel economy.... its not tha bad but i just say it.!!
4 dollar a gallon down here its no joke ![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
1985 710MS
1985 712MK
1988 PAJERO CAMEL SPECIAL 042/150
1985 712MK
1988 PAJERO CAMEL SPECIAL 042/150
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: 710M rebuild
Made a new knob for the EZ power steering sensitivity controller
Made it from an old Mog switch
Original knob on top Installed
Made it from an old Mog switch
Original knob on top Installed
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: 710M rebuild
Yes that looks better and also allows easier visual verification of the assist setting. Good job.
-
- Posts: 5
- Joined: Mon Jul 18, 2016 12:23 am
Re: 710M rebuild
What a great Thread.....your Pinz looks just STUNNING!!
Unbeliavable attentionto detail!
Enjoy!
Unbeliavable attentionto detail!
Enjoy!
- TechMOGogy
- Posts: 2831
- Joined: Wed Feb 01, 2012 11:39 am
- Location: Ontario, Canada
Re: 710M rebuild
Thank you - it is basically a new Pinz as everything was restored or replaced.petri oosthuizen wrote:What a great Thread.....your Pinz looks just STUNNING!!
Unbeliavable attentionto detail!
Enjoy!
It is away for the Winter (salt) and I can't wait for Spring!
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Re: 710M rebuild
Wow Dan! Looks amazing!
Are you signed up for the RR 2017? Don't think I can attend this year...only RR I did was on a bike...but you will definitely be a hit!
Do well at the RR and maybe it will increase the potential sale price of mine!! LOL
Are you signed up for the RR 2017? Don't think I can attend this year...only RR I did was on a bike...but you will definitely be a hit!
Do well at the RR and maybe it will increase the potential sale price of mine!! LOL
Ottawa, Canada
1974 710M
2007 2WD Ural Patrol
1974 710M
2007 2WD Ural Patrol