Build projects, things that guys have come up with to make a Pinz better (or worse?) and aftermarket add-ons.
NEWFISHER
Posts: 315 Joined: Mon Nov 09, 2015 10:52 am
Location: Oregon--NorthWet
Post
by NEWFISHER » Fri Mar 24, 2017 2:50 pm
Sonarman- looking good!
TechMogogy-
Sonarman
Posts: 80 Joined: Sun Feb 05, 2017 8:15 pm
Location: Sonoma, Ca
Post
by Sonarman » Fri Mar 24, 2017 5:12 pm
Did temporary mount up of hiqh lift. Next cut a bit off the hoop to lower it, then I will take it apart for priming and paint.
Attachments
IMG_1331.JPG (106.39 KiB) Viewed 3174 times
Sonarman
Posts: 80 Joined: Sun Feb 05, 2017 8:15 pm
Location: Sonoma, Ca
Post
by Sonarman » Sun Mar 26, 2017 5:21 pm
Had some time and scrap so made some roof rack support brackets.
Attachments
IMG_1333.JPG (108.98 KiB) Viewed 3146 times
Sonarman
Posts: 80 Joined: Sun Feb 05, 2017 8:15 pm
Location: Sonoma, Ca
Post
by Sonarman » Thu Mar 30, 2017 12:28 pm
Just finished 1 phase of roof rack. Easy to modify if I don't like it. Only going to be for light loads. Very quick to remove probably won't have it on most of the time.
Attachments
IMG_1352.JPG (144.27 KiB) Viewed 3109 times
IMG_1354.JPG (162.4 KiB) Viewed 3109 times
TechMOGogy
Posts: 2831 Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada
Post
by TechMOGogy » Thu Mar 30, 2017 12:41 pm
NEWFISHER's old truck yes?
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
Sonarman
Posts: 80 Joined: Sun Feb 05, 2017 8:15 pm
Location: Sonoma, Ca
Post
by Sonarman » Thu Mar 30, 2017 3:11 pm
Yes,
It is Newfisher old truck. No unceccary drilling or welding the rack to the body which is something Newfisher and I have in common!