Speedo reading mph?

All things body, interior, paint, windows, tops... you know.
Post Reply
bobman12
United States of America
Posts: 4
Joined: Wed Jun 27, 2018 1:09 am

Speedo reading mph?

Post by bobman12 »

I just bought a '71 710M in otherwise excellent condition, but I noticed while driving it that it's definitely reading in MPH (radar signs on roads confirm) even though the speedo and odo are still reading kph. They are also definitely original judging by the rust around the ring. So the question is... how was this done (and how to change it back to stock)? Searched the forums but couldn't find anything... thanks!
undysworld
Norway
Posts: 1776
Joined: Fri Apr 16, 2004 8:08 am
Location: Blue Mounds, WI

Re: Speedo reading mph?

Post by undysworld »

bobman12 wrote: Tue Jul 10, 2018 12:30 amit's definitely reading in MPH (radar signs on roads confirm) even though the speedo and odo are still reading kph.
Huh? I don't understand your comment. If your speedo and odo are calibrated in km's, what part of the truck is "reading in MPH"?
It is better to go skiing and think of God, than go to church and think of sport. Fridjof Nansen
I hope to die in my ski boots... ...just not today. Me
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Speedo reading mph?

Post by rmel »

Hmmm, I think what your saying is that the face plate of the speedo is calibrated kph.

However, your seeing that the needle is lined up at say 50 kph and Radar signs are
telling you your going 50 mph rather than 80.54 kph.

If the odometer is also ticking along in mph and not kph I would suspect that the gearing
in the VDO speedo had to have been changed.

I can't recall where I saw this, but I have stumbled across at least one place that rebuilds
classic VDO speedo's and also sells gear replacement sets. Someone may have gotten cleaver.

And if it's working this way why not leave it :wink:
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
bobman12
United States of America
Posts: 4
Joined: Wed Jun 27, 2018 1:09 am

Re: Speedo reading mph?

Post by bobman12 »

Yea so If I'm going 30 mph the speedo needle is at 30 (kph) instead of reading 50 kph.

I haven't yet checked to see if the odometer is logging mph or kph.

Only incentive for me here is to bring it back to stock...
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Speedo reading mph?

Post by rmel »

Obviously, if the odometer still registers in KPM then someone replaced the Speedo faceplate otherwise it’s the internal gears.


Sent from my iPhone using Tapatalk
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
User avatar
VinceAtReal4x4s
Admin
United States of America
Posts: 2035
Joined: Mon Apr 12, 2004 10:36 pm
Location: Ca. or lost in South West USA
Contact:

Re: Speedo reading mph?

Post by VinceAtReal4x4s »

These guys do all the VDO conversions and calibrations. They are not cheap though.
http://www.nhspeedometer.com/
"For those who risk, life has a flavor the protected shall never enjoy"

Your donation makes this site possible!

Image
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Speedo reading mph?

Post by rmel »

Hey! Here's another shop but in a low(er) rent district :wink:

It's not the shop I stumbled onto sometime ago that had VDO replacement gears.

http://seattlespeedometer.com/
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
bobman12
United States of America
Posts: 4
Joined: Wed Jun 27, 2018 1:09 am

Re: Speedo reading mph?

Post by bobman12 »

Ok so update on this...

1. The speedo is just wrong, not necessarily MPH.

When it reads 25 KPH it's going about 25-30 MPH
When it reads 45 MPH it's going about 50-60 MPH
At higher speeds the speedo kind of bounces around

2. The odometer is actually dead. Not sure how I missed this before, but it just doesn't move at all.
User avatar
rmel
United States of America
Posts: 1395
Joined: Sun Sep 25, 2011 12:19 pm
Location: Woodside, CA
Contact:

Re: Speedo reading mph?

Post by rmel »

That sounds like a weak hairspring, high reading and bouncy.
If you like taking watches apart and fixing them, here's a link
that might be of some help, or time for a new Speedo :wink:

http://dragonflypower.com/VWspeedometerHow2.htm
Puller: 71' 710K 2.7L EFI aka Mozo
Follower: Sankey MK 3, 3/4 Tonne
Rescue Pinz: 73' 712MK

Driver: Ron // KO0Q
bobman12
United States of America
Posts: 4
Joined: Wed Jun 27, 2018 1:09 am

Re: Speedo reading mph?

Post by bobman12 »

Thank you!!
Post Reply