Inspection prior to buy, how?

All things not relating to the other forums.
Post Reply
future pinzi
United States of America
Posts: 4
Joined: Mon Jan 14, 2019 10:20 pm

Inspection prior to buy, how?

Post by future pinzi »

New to P's, but plan to get 710m and bud may get a 712m. Since neither of us know how drive on4e and what does what, even if on site with P, could not really inspect for issues. So how do we find those that know the things and what to look at, inspect and even drive. Have seen few posts where looks like folks bought a lot of work/money. Doubt wife would be to thrilled to have one show up, then blow up or big $'s, so what is best to check out ahead of buy?. Note am mechanical, but not enough to really inspect a P and systems.
undysworld
Norway
Posts: 1776
Joined: Fri Apr 16, 2004 8:08 am
Location: Blue Mounds, WI

Re: Inspection prior to buy, how?

Post by undysworld »

Future,

If I was you, I'd post up my location. These trucks are all over, but there's just not many of 'em. If we know where you are, someone may chime in nearby. Believe it or not, most of us are plenty willing to show our trucks to others.

You might also find someone nearby who can inspect a truck competently. This is pretty common with collector vehicles. It might take a couple hours, and it might cost a bit, but it could be money well spent, IMHO.

You are looking at used vehicles. Used vehicles will have issues, in most cases. Even if it doesn't have any problems, a Pinz requires more maintenance than modern vehicles. You'll need to do things like adjust the brakes, because they are not self-adjusting, etc. Don't spend ALL of your money to buy it, save some for contingencies.

If you spend some time here, you will find some reputable owners who occasionally sell a well-maintained truck.

Good luck hunting.
It is better to go skiing and think of God, than go to church and think of sport. Fridjof Nansen
I hope to die in my ski boots... ...just not today. Me
future pinzi
United States of America
Posts: 4
Joined: Mon Jan 14, 2019 10:20 pm

Re: Inspection prior to buy, how?

Post by future pinzi »

We will be moving back to PAC NW (probably Nrn ID) within year. Doing some planning now. Did a bit of checking with some "Auto inspector service", most did not have a clue what Pinz actually was, so they are out.
tgreening
United States of America
Posts: 78
Joined: Sun Oct 14, 2018 9:02 pm
Location: Ohio

Re: Inspection prior to buy, how?

Post by tgreening »

User avatar
TechMOGogy
Canada
Posts: 2831
Joined: Wed Feb 01, 2012 11:39 am
Location: Ontario, Canada

Re: Inspection prior to buy, how?

Post by TechMOGogy »

x2
It's old info but it does not change!
72 Pathfinder | 75 710M 2.7i | 96 350GDT Worker
future pinzi
United States of America
Posts: 4
Joined: Mon Jan 14, 2019 10:20 pm

Re: Inspection prior to buy, how?

Post by future pinzi »

Thanks for link, just great stuff. This is kind of data we will need. Restored a few cars/trucks and found pre-buy inspections, when distant buy, well worth while. Only had one where inspection should have been more thoroughly done. Sure saves lot of $'s/work but not any of usual inspection sites knows much about the P's. How are they 710/712's on a road, not interstate but county roads... Sure would want one to use when bird hunting as some places a wee bit difficult for even 4x4 trucks.. REALLY looking forward to move and the P's, Now wife wants the small one, thinks "Great for gardens and driving around to get pics as out door photog is her hobby... Should not have showed her pics/data of "Baby Pinz" as she calls them.

Thanks again downloaded the data. Learned long ago to ask the folks whom own one to get the straight talk. Should have done more background on austin 100-6 I once bought.. spent a lot of dollars on machine a\owner said "runs well", and did for about 1 hour, then????????
User avatar
David Dunn
United States of America
Posts: 2274
Joined: Wed Apr 14, 2004 7:08 pm
Location: Arcadia, CA

Re: Inspection prior to buy, how?

Post by David Dunn »

Baby Pinz...LOL... Over double your budget ! :shock: A Haflinger in decent condition will cost you as much (or more) as a 710 in equal condition. :lol:
.
The Trojan Horse... the 1st Pinz used to covertly carry troops into battle .




ATL Pinzgauer XM 718K TUM(HD) 6x6 FFR (aka The Green Grail)
future pinzi
United States of America
Posts: 4
Joined: Mon Jan 14, 2019 10:20 pm

Re: Inspection prior to buy, how?

Post by future pinzi »

I have mentioned cost to wife, but cautious as she mentioned costs for 710...so step cautiously there.. have time to work on it a bit..
User avatar
4x4Pinz
United States of America
Posts: 1030
Joined: Sat Oct 24, 2009 6:17 pm
Location: arizona

Re: Inspection prior to buy, how?

Post by 4x4Pinz »

You would be well advised to find an owner and talk with them and take s ride. I can tell you that s pinz is louder then most other vehicles but until you experience it for yourself it is subjective. I have no issues driving my pinz on the highway system but I keep a close eye on the truck and then traffic around me. Done places it just does not make sense to drive freeways. Bunch of idiots that think speed limit is what ever their vehicle will do. Pinz in general is comfortable between 55 and 60.
Post Reply