EFI
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
I hope to have it running by weekend.
But until then, here are a couple pics of the completed ECU center.
First image is the 24 to 12v starter signal circuit. It is 2 1K 1/4 watt resistors in series, one end is 24v signal, other end is ground(earth for the UK guys), 12v is tapped from between resistors to feed computer starting enrichment signal.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1101102158.jpg)
Harness access locations.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1103101633.jpg)
ECU Center ready to install.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1103102335.jpg)
ECU in place.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1103102339.jpg)
And one of the heat shield mod to fit TPS connector.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1103101648.jpg)
Carbs converted to throttle body with TPS
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1018102314a.jpg)
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1018102319.jpg)
Enjoy more to come![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
But until then, here are a couple pics of the completed ECU center.
First image is the 24 to 12v starter signal circuit. It is 2 1K 1/4 watt resistors in series, one end is 24v signal, other end is ground(earth for the UK guys), 12v is tapped from between resistors to feed computer starting enrichment signal.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1101102158.jpg)
Harness access locations.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1103101633.jpg)
ECU Center ready to install.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1103102335.jpg)
ECU in place.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1103102339.jpg)
And one of the heat shield mod to fit TPS connector.
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1103101648.jpg)
Carbs converted to throttle body with TPS
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1018102314a.jpg)
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1018102319.jpg)
Enjoy more to come
![Twisted Evil :twisted:](./images/smilies/icon_twisted.gif)
-
- Posts: 36
- Joined: Wed Feb 04, 2009 1:44 am
- Location: Belgium
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact:
Here are a few more pic's.
First one is starter signal resistor pack install point(black wire from starter to solenoid).
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1104101628.jpg)
Next, remove drain plug from gas tank, install 1/4"NPT to 5/16" line fitting adaptor(use only LIQUID TEFLON SEALANT).
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1104102216.jpg)
Bend and fit 5/16"return line
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1104102231.jpg)
More to come..........................................................................
First one is starter signal resistor pack install point(black wire from starter to solenoid).
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1104101628.jpg)
Next, remove drain plug from gas tank, install 1/4"NPT to 5/16" line fitting adaptor(use only LIQUID TEFLON SEALANT).
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1104102216.jpg)
Bend and fit 5/16"return line
![Image](http://img.photobucket.com/albums/v510/Goatwerks/Volvo%20C303%20repair%20pics/1104102231.jpg)
More to come..........................................................................
-
- Posts: 1704
- Joined: Wed Apr 14, 2004 3:42 pm
- Location: San Bernardino Ca
- Contact: