Studs
Posted: Sun Jun 03, 2007 7:58 pm
I want to get a die to run down my wheel studs to help get some of the burrs off.
Anyone know what the thread pitch is :?:
Chuck
Anyone know what the thread pitch is :?:
Chuck
THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!
From Vince Sweeney: You have arrived at the original "Real 4x4's" Forums, founded in 1999.
https://www.real4x4forums.com/PinzgauerBBS/
Studs
https://www.real4x4forums.com/PinzgauerBBS/viewtopic.php?t=2862
Page 1 of 1
Posted: Sun Jun 03, 2007 8:56 pm
14x1.5
Posted: Sun Jun 03, 2007 9:18 pm
Thanks Jim
Chuck
Chuck
Posted: Sun Jun 03, 2007 9:41 pm
Chuck... If its not to bad you may be able to use a thread repair file. Its like a file thats square and has diffrent thread pitches on each side. Mine is made by KD tools and has 2 sizes per side for a total of 8 thread sizes. Its a great tool for the occasional squished thread area. I use a standard chisel to rough the damaged area back to groves then follow up with the file. Works out well for on the trail as I like to make sure all sizes are covered with one tool. Another option is a miniture v shaped file that has the same angle as the tread grooves.
Miles
Miles