Page 1 of 1
LUG NUT TORQUE
Posted: Wed Feb 04, 2009 1:19 pm
by stevo
Am a newbie here, perhaps someone can help me out. Am unable to find any info on the proper lug nut torque for the Pinzie. Thanks, Stevo.
Posted: Wed Feb 04, 2009 7:52 pm
by Buzz
My torque wrench is set a 110 lbs. - Buzz
Just another unique feature of the Pinz.
Posted: Thu Feb 05, 2009 12:27 am
by Scottie
The lug nuts should be torqued with the wheel off of the ground (yes, still in the air). The centering of the wheel is lug centric, not hub centric.
Posted: Thu Feb 05, 2009 7:27 am
by pinzinator
I always spin the tire to center it while hand tightening the lug nuts in sequence. Once the tire is back on the ground, I tighten to 65 ft/lbs in sequence, then 95. After a few miles I tighten again to 95. Never had a problem and the Pinz rides OK.