Amplifier and 12v install photo
Posted: Fri Oct 09, 2009 3:20 pm
Wanted to share the end product of my 12v converter and amplifier install. Since its a 710m and parked outside, theft is a major concern, so i needed to make things as camouflaged as possible. Camo spray paint to the rescue.
Amp is an old PG Sapphire running two sets of Pioneer truck speakers. PLENTY loud enough.
I cut a small piece of treated plywood to the proper size for mounting the amp. I purchased a few long screws and replaced the screws that hold the vent panel behind the driver door. These screws hold the amp in place.
http://picasaweb.google.com/lh/photo/YE ... directlink
Amp is an old PG Sapphire running two sets of Pioneer truck speakers. PLENTY loud enough.
I cut a small piece of treated plywood to the proper size for mounting the amp. I purchased a few long screws and replaced the screws that hold the vent panel behind the driver door. These screws hold the amp in place.
http://picasaweb.google.com/lh/photo/YE ... directlink
