C30x transmission length?
Posted: Tue Feb 15, 2011 10:46 am
Just wondering if someone has easy access to a tranny to measure the length from the front of the bellhousing to the transfer case mounting surface. Thanks.
THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!
From Vince Sweeney: You have arrived at the original "Real 4x4's" Forums, founded in 1999.
https://www.real4x4forums.com/PinzgauerBBS/
C30x transmission length?
https://www.real4x4forums.com/PinzgauerBBS/viewtopic.php?t=6142
Page 1 of 1
Re: C30x transmission length?
Posted: Fri Feb 18, 2011 11:59 am
Anyone? With the wealth of knowledge on this board somebody must know.
Re: C30x transmission length?
Posted: Sun Feb 20, 2011 10:49 pm
I'll get a measurement tommorrow.
Re: C30x transmission length?
Posted: Mon Feb 21, 2011 12:36 pm
Exactly 40cm from front of bell housing to transfer case mating surface 
Re: C30x transmission length?
Posted: Tue Feb 22, 2011 4:13 pm
Thanks Jim! Just doing some research and that helps me out.Jim LaGuardia wrote:Exactly 40cm from front of bell housing to transfer case mating surface
They sure are short trannys aren't they.Re: C30x transmission length?
Posted: Tue Feb 22, 2011 5:09 pm
Bell housing is 15cm, trans is 25mm from front mating surface to the transfer case mounting surface. Standard ZF gearbox size for that era.