Finished.....710K before and after
Posted: Thu Aug 14, 2014 1:12 pm
- 20140514_064211.jpg (216.5 KiB) Viewed 6559 times
THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!
From Vince Sweeney: You have arrived at the original "Real 4x4's" Forums, founded in 1999.
https://www.real4x4forums.com/PinzgauerBBS/
Finished.....710K before and after
https://www.real4x4forums.com/PinzgauerBBS/viewtopic.php?t=9170
Page 1 of 2
Just finished up my 710K. After brakes,exhaust,boots,tires and fighting the ignition system for weeks: the best mod I've ever done, the Pinz SSI (never had one start so easy,run so good, and stink so little...)
Re: Finished.....710K before and after
Posted: Thu Aug 14, 2014 1:41 pm
What tires are you running? Stock rims?
(BTW, looks great!
)
(BTW, looks great!
)Re: Finished.....710K before and after
Posted: Thu Aug 14, 2014 5:09 pm
The tires are Kenda Klever M/T KR29 265/75R16's , on stock rims. Thanks
Re: Finished.....710K before and after
Posted: Thu Aug 14, 2014 5:23 pm
Nice!
Are those LED turns an pd stops below the stock ones?
You should list all that you did to it!
Are those LED turns an pd stops below the stock ones?
You should list all that you did to it!
Re: Finished.....710K before and after
Posted: Thu Aug 14, 2014 5:37 pm
Looks great! Nice paint job and add-ons. The tires look really sharp too!
Re: Finished.....710K before and after
Posted: Fri Aug 15, 2014 3:56 am
I'm interested in your ignition battle. I have a 1973 710K and the ignition upgrade has proved impossible to get working, even with Dale at Haflingertechnik working on it. What did you find out during yours?
Tony
Tony
Re: Finished.....710K before and after
Posted: Fri Aug 15, 2014 3:31 pm
Upgrade, you mean the SSI or the Petronix?
My truck came with the Petronix, the 2 prior owners had problems with blowing coils since '09. The distributor was a mess inside. It would run fine at idle for about half an hour, any attempt to raise the RPM's caused backfiring, and sputtering. A friend, and board member ( Paul C.) had installed the SSI in his two 710's and said it was easy to do (it was), and made the truck run the best (it did). My K now runs like a 16k mile truck should...
My truck came with the Petronix, the 2 prior owners had problems with blowing coils since '09. The distributor was a mess inside. It would run fine at idle for about half an hour, any attempt to raise the RPM's caused backfiring, and sputtering. A friend, and board member ( Paul C.) had installed the SSI in his two 710's and said it was easy to do (it was), and made the truck run the best (it did). My K now runs like a 16k mile truck should...
Re: Finished.....710K before and after
Posted: Fri Aug 15, 2014 4:16 pm
I'm looking to buy a car trailer to transport my 712M and 712K (one at a time 
Curious about your model and experience. Would you recommend it? Anyone else in the forum has recommendations?
Curious about your model and experience. Would you recommend it? Anyone else in the forum has recommendations?
Re: Finished.....710K before and after
Posted: Fri Aug 15, 2014 4:23 pm
Mine's a Gator-Made, 18ft deck,10k rated, with fold up HD ramps.. You can get one down here (central KY) at the factory for about 2900. It tows great, and is well made.
Re: Finished.....710K before and after
Posted: Fri Aug 15, 2014 6:17 pm
Pinz looks great!!
Yeah saw it in person looks very well made and it's towed a few pinzis I think my brothers was the first.muttandjeeps wrote:Mine's a Gator-Made, 18ft deck,10k rated, with fold up HD ramps.. You can get one down here (central KY) at the factory for about 2900. It tows great, and is well made.
Re: Finished.....710K before and after
Posted: Sun Aug 17, 2014 5:58 pm
Just to clarify, bonefish635 does not have a PinzSSI ignition system. I did sell one to a guy in England, and he is quite happy with it in his 712. None have been sold in Scotland yet.
He might have Pertronix. Dale is a sharp guy, if he can't fix the problem then something is REALLY wrong.
He might have Pertronix. Dale is a sharp guy, if he can't fix the problem then something is REALLY wrong.
Re: Finished.....710K before and after
Posted: Tue Aug 19, 2014 3:39 pm
Looks great! How much invested?... if you don't mind me asking.
Re: Finished.....710K before and after
Posted: Tue Aug 19, 2014 7:52 pm
Questionable tie down points.
Re: Finished.....710K before and after
Posted: Wed Aug 20, 2014 9:36 am
Audio, really....... I've moved MANY Pinz's, both 4 and 6 wheel drive, and never had a problem. I guess I'm just lucky
Re: Finished.....710K before and after
Posted: Wed Aug 20, 2014 11:47 am
Sorry, i typed that with my phone. There should have been a question mark after it.
I'm wondering if they are questionable tie down points. I'm afraid front bumper locations would pull the nose down on my 712, creating the wonderful doors not closing scenario. I had to have the nose bent back up at a body shop after my last crash landing.
I'm wondering if they are questionable tie down points. I'm afraid front bumper locations would pull the nose down on my 712, creating the wonderful doors not closing scenario. I had to have the nose bent back up at a body shop after my last crash landing.