EFI Kit Nearing Completion

Erik712m · Post by **Erik712m** » Fri Aug 01, 2008 12:49 pm

There is a problem with this website's security certificate.
Jake every time i would try to pay this would pop up just making sure you got my payment?

MASSIVE PINZ · Post by **MASSIVE PINZ** » Fri Aug 01, 2008 12:51 pm

Its fine.. Its uour browser, it happens from time to time.. All is well..
And no cards are being charged till further notice. I want to do all the admin at one time.

Erik712m · Post by **Erik712m** » Fri Aug 01, 2008 12:59 pm

Thanks Jake The office computer seems to be giving me problems lately.

jchobby · Post by **jchobby** » Wed Aug 20, 2008 12:58 pm

Jake, sent you CC info today to your email. looking forward to yanking off those carbs!

MASSIVE PINZ · Post by **MASSIVE PINZ** » Wed Aug 20, 2008 3:55 pm

Email is not a secure means of transmitting CC info! I haven't received any CC info at my inbox today!

The order must be placed through my online store, as instructed in my previous posts. This is secure and will also give us all your contact info, shipping address and will serve as a means of a receipt on your end.

I have been posting info a bit at a time on my Pinz FI forum, have you been visiting that area??

Erik712m · Post by **Erik712m** » Wed Aug 20, 2008 8:01 pm

Jake, I have been following your forum but i haven't seem any up date's. Will you PM me on your side were it is. Thanks Erik Maybee

Lisaspinz · Post by **Lisaspinz** » Wed Oct 08, 2008 1:46 pm

ACT took payment on my EEC unit two weeks ago. Did anyone else pay? Has anyone taken posession of their EEC?

MB

Erik712m · Post by **Erik712m** » Wed Oct 08, 2008 2:28 pm

Lisa, Did Jake not call you? My card was billed two weeks ago and Jake stated the E.T.A. at the end of October.

Lisaspinz · Post by **Lisaspinz** » Wed Oct 08, 2008 3:19 pm

Jake did, I was just wondering if he had started shipping them yet. I asked the question here because I hate to bother Jake.

MB

MASSIVE PINZ · Post by **MASSIVE PINZ** » Wed Oct 08, 2008 10:13 pm

As of Tuesday all kits are paid for and the ECUs are being programmed and being shipped from Canada beginning next week in batches of four units at a time, TO US. We'll then label the harnesses and finish terminating the connectors for easy connection to the Pinz.

The waterjet cutter is finishing up the plenum pieces and I'll begin Tig welding them in about 10 days. All is looking good to be finished up by the end of the month, getting from this stage to the end won't be as long or painful as it took to get here...

All purchasers: Please use the EFI support forum for ALL info for these kits as I seldom get to this site these days and it may take days to get a response from me here.. If you can't access that forum please email jake@aircooledtechnology.com for a new password.

From this point on all our dialogue needs to be shared on the FI forum. Posting on that forum will never bother me as I spend two hours a day there anyway with my customer base.

All kits will be shipped in a mass shipping event here, just as the units are being assembled so when one leaves, they all leave. Prior to shipping I will schedule a final chat with each purchaser in the form of a webinar so we can all communicate at once, get questions answered and get ready for you to receive the kits. I'll be scheduling the webinar when I have a more accurate absolute ship date.

gunnar · Post by **gunnar** » Sun Oct 26, 2008 3:15 am

If someone doesn`t want the EFI anymore I would like to buy it.
Please contact me via PM.

greetings from Austria
Gunnar

MASSIVE PINZ · Post by **MASSIVE PINZ** » Tue Oct 28, 2008 11:02 pm

Gunnar,
we had 4 individuals not follow through with their kit purchases, which given the current state of the economy and the fact that it took me two years to complete the development and kits I feel thats exceptional.

Instead of selling the remaining 4 kits we just changed the quantity to 16 systems Vs 20 and we are now in the final days of completion... We'll be welding plenums next week.

gunnar · Post by **gunnar** » Wed Oct 29, 2008 8:55 am

thet`s a pity as I really would have liked to get a kit

pinzi · Post by **pinzi** » Mon Nov 10, 2008 12:31 pm

I've tried it with a k-jet tronic out of a volvo 23l and it works...just need some more time to put the injectors in the intake tubes a little shorter at the intake valve's...but it works.

pinzdriver · Post by **pinzdriver** » Sat Dec 27, 2008 10:04 pm

Well it's past christmas and santa did not leave me a efi kit under my tree did i miss something?

THE PORTAL HUB - Pinzgauers, Haflingers, Volvo 303s and more!

EFI Kit Nearing Completion

injection

efi kits