Could someone clue me in on how to effectively remove the retainer rings that lock the dif-lock selectors in place. I fear that over-exuberance on my part will cause me trouble..
Mine is sort of bed-linered in place..
Thanks.
Selector locking ring removal.
Moderator: TechMOGogy
- cascade.king
- Posts: 262
- Joined: Fri Mar 08, 2013 6:41 am
- Location: Vermont, USA
Selector locking ring removal.
Mike
1971 North American 700AP Haflinger Pathfinder
1971 North American 700AP Haflinger Pathfinder
Re: Selector locking ring removal.
Looks like it is in the up / engaged position. How about some penetrating oil to soak it for a day or two and then some mallet taps to try to break the bed liner goo free? Once it drops down you can clean it better from underneath.
- cascade.king
- Posts: 262
- Joined: Fri Mar 08, 2013 6:41 am
- Location: Vermont, USA
Re: Selector locking ring removal.
I just want to get the silver ring removed so I can pull the selector out. I can't figure how to get the ring to release..
Mike
1971 North American 700AP Haflinger Pathfinder
1971 North American 700AP Haflinger Pathfinder
Re: Selector locking ring removal.
I'm pretty sure you just turn it, but if you ask the question over on the haflinger.com ste, you will get an answer from people who have actually done it!
I've just looked at mine!
John
I've just looked at mine!
John
Admin for www.thehaflinger.com
Re: Selector locking ring removal.
Just responded over on TheHaflinger.com.
Push in the buttons and lift the ring - it does not twist. Lots of lube may be needed.
Garry
Push in the buttons and lift the ring - it does not twist. Lots of lube may be needed.
Garry
1973 Haflinger AP700
1977 Landrover FC 101
2007 Range Rover Sport TDV6
1971 Jaguar Series 3 E-Type Conv
1957 Landrover 88" Station Wagon
1957 Landrover 88"
1977 Landrover FC 101
2007 Range Rover Sport TDV6
1971 Jaguar Series 3 E-Type Conv
1957 Landrover 88" Station Wagon
1957 Landrover 88"