which pinzgauer in stock condition is worth the most ?

All things not relating to the other forums.

which pinzgauer in stock condition is worth the most $$ ?

710m
0
No votes
710k
5
19%
712m
6
23%
712k
15
58%
any AMB
0
No votes
 
Total votes: 26

norcal pinz
United States of America
Posts: 396
Joined: Thu May 01, 2008 11:41 pm
Location: northern california

which pinzgauer in stock condition is worth the most ?

Post by norcal pinz »

:?: :?: :?: :?: :?: sorry no diesels or halflingers :twisted:
710M 1972
710k 1974
todds112
Posts: 666
Joined: Sun Dec 03, 2006 5:45 pm
Location: Jackson Hole, WY

Post by todds112 »

I am guessing it's a supply and demand thing. Of the ones you listed the 712K seems like the rarest. The holy grail of Pinz's is the 712DK I believe. I was thinking there is only 1 of those in the US.
1973 712M
Erik712m
Posts: 1553
Joined: Sun Jan 21, 2007 7:52 pm
Location: Wichita, Kansas

Post by Erik712m »

todds112 wrote:I am guessing it's a supply and demand thing. Of the ones you listed the 712K seems like the rarest. The holy grail of Pinz's is the 712DK I believe. I was thinking there is only 1 of those in the US.
I believe there are two now. I think Scott sold one on the yahoo forum not to long ago. But probably only one in the engineer anal condition. :) Norcal this has been done before. :P search the forum
andy
Posts: 963
Joined: Thu Feb 15, 2007 6:31 pm
Location: Comstock, TX

Post by andy »

Erik712m wrote: But probably only one in the engineer anal condition. :)
Is that a form of hemorroids? Is it something only engineers get? What kind of engineers, the train driver kind or the ones that build stuff? Is it contagious?

Just wondering.
A bar F
The buck STARTS here
www.deerleaseservices.com
Erik712m
Posts: 1553
Joined: Sun Jan 21, 2007 7:52 pm
Location: Wichita, Kansas

Post by Erik712m »

I Believe it's an abbreviation of the following:
1 analysis

2 analyze

I here this saying all the time. ( That engineer is just being overly anal. It's ok that the truss is two inches off its load bearing point) In this point, I would think it would be that his pinz has been over analyzed and maintained. He is "anal" retentive about the maintenance. :?
Andy is your mind in the gutter? :lol:
andy
Posts: 963
Joined: Thu Feb 15, 2007 6:31 pm
Location: Comstock, TX

Post by andy »

I was just going by what was written on the screen. Way back when I went to school we were told an abbreviation requires a period after it. I searched mightily and could not find the little dot so ergo given what was written I could only surmise that this was some sort of new medical condition that afflicts only engineers. Given the subject matter is not something one is likely to be informed about by the main stream media. I was concerned since I know several train driver engineers and wanted to warn them if it applied to them. :) :)

Andy
A bar F
The buck STARTS here
www.deerleaseservices.com
Erik712m
Posts: 1553
Joined: Sun Jan 21, 2007 7:52 pm
Location: Wichita, Kansas

Post by Erik712m »

Well, Andy I went to public school what can you say. Got love Government employees. But in this point you are wrong. Anal has become slang there for no little dot needed.( AS it forms a word in its own) Although ideally the anal would have been before engineer it still should have made since if a little common since would have been applied.

1. Abbreviation 33 up, 2 down

A shortened form of a word or phrase.

-

Types of abbreviations:

There are four main kinds of abbreviations: shortenings, contractions, initialisms, and acronyms. 1 Shortenings of words usually consist of the first few letters of the full form and are usually spelled with a final period when they are still regarded as abbreviations, for example, cont. = continued, in = inch. In the cases when they form words in their own right, the period is omitted, for example, hippo = hippopotamus, limo = limousine. Such shortenings are often but not always informal. Some become the standard forms, and the full forms are then regarded as formal or technical, for example, bus = omnibus, taxi = taxicab, deli = delicatessen, zoo = zoological garden. Sometimes shortenings are altered to facilitate their pronunciation or spelling: bike = bicycle2 Contractions are abbreviated forms in which letters from the middle of the full form have been omitted, for example, Dr. = doctor, St. = saint or street. Such forms are invariably followed by a period. Another kind of contraction is the type with an apostrophe marking the omission of letters: can't = cannot, didn't = did not, you've = you have. 3 Initialisms are made up of the initial letters of words and are pronounced as separate letters: CIA (or C.I.A.), NYC, pm (or p.m.), U.S. (or US). Practice varies with regard to periods, with current usage increasingly in favor of omitting them, especially when the initialism consists entirely of capital letters. 4 Acronyms are initialisms that have become words in their own right, or similar words formed from parts of several words. They are pronounced as words rather than as a series of letters, for example, AIDS, laser, scuba, UNESCO, and do not have periods. In many cases the acronym becomes the standard term and the full form is only used in explanatory contexts.

An example of an abbreviation is abbr, which is short for "abbreviation".
Last edited by Erik712m on Sun Nov 16, 2008 8:09 pm, edited 2 times in total.
buzzz
Posts: 67
Joined: Sun Feb 10, 2008 8:03 pm
Location: Tupelo Ms.

Post by buzzz »

I know I need to stay out of this but, great humor Andy. I cant stop laughing.
Erik712m
Posts: 1553
Joined: Sun Jan 21, 2007 7:52 pm
Location: Wichita, Kansas

Post by Erik712m »

Andy, If you were being funny I apologize. I just got home a little bit ago from three days in a very cold tree followed by a long Pinz ride home.

My humor may not be very good right now.
andy
Posts: 963
Joined: Thu Feb 15, 2007 6:31 pm
Location: Comstock, TX

Post by andy »

Buzz...and why do you suppose you couldn't but in? You, and anybody else are always welcome to comment, positively or negatively. I'm not sure if it was humor or farce though.

Andy
A bar F
The buck STARTS here
www.deerleaseservices.com
ka
Posts: 445
Joined: Mon Jun 02, 2008 8:34 pm
Location: slc,scruz,chico,bldr,kalalau,flag,sb

Post by ka »

per ASME Y14.38a-2002?
1973 710m
"it is not in the best interest of the shepherd to breed smarter sheep." ~ author unknown

press any key to continue or any other key to quit. ~author confidential
User avatar
ScottishPinz
Great Britain
Posts: 407
Joined: Wed Feb 22, 2006 3:04 am
Location: Edinburgh, Scotland
Contact:

Post by ScottishPinz »

Yes hard top 6x6 for sure, same here in UK, what it would have been interesting to see is HOW much MORE than a 710m these are worth! Funny thing about the often overlooked amb is they are only a couple of roll hoops and a canvas away from a 712m or a cheap starting point for a custom hard top. Here I'd guess:
710m £7500
712m £9000
amb £9000 these are still coming from Swiss so 2nd owner to you and me
710k £10500
712k £14000

They are still a very rare vehicle so its hard to be sure!
Jim LaGuardia
United States of America
Posts: 1707
Joined: Wed Apr 14, 2004 3:42 pm
Location: San Bernardino Ca
Contact:

Post by Jim LaGuardia »

712MK, or 712W, both rare and retain value well. Seems your list is a little short :roll:
Cheers, Jim LaGuardia
http://smg.photobucket.com/albums/v510/Goatwerks/
"Arch Magus of Machines."
norcal pinz
United States of America
Posts: 396
Joined: Thu May 01, 2008 11:41 pm
Location: northern california

Post by norcal pinz »

ok sorry guys that poll sucked, what i was really wondering is would it be a good idea to trade my k for a 712 of equal condition????? :?: Scottish pinz said the k is worth a little more if so that is awesome.
710M 1972
710k 1974
ka
Posts: 445
Joined: Mon Jun 02, 2008 8:34 pm
Location: slc,scruz,chico,bldr,kalalau,flag,sb

Post by ka »

is a 712m noticably slower at accellerating than a 710m? i know the 712 has a lower geared tranny so its top speed is like 5 mph less, but i've only ever driven a 712amb and this 710m, never a 712m.
Last edited by ka on Tue Nov 18, 2008 8:36 pm, edited 2 times in total.
1973 710m
"it is not in the best interest of the shepherd to breed smarter sheep." ~ author unknown

press any key to continue or any other key to quit. ~author confidential
Post Reply